Speaker Setting; Switching Display - Kenwood KDC-M6024/G Instruction Manual

General features

Speaker Setting

Fine-tuning so that the System Q value is optimal when setting
the speaker type.
1
Enter Standby
Press the [SRC] button.
Select the "ALL OFF" display.
2
Enter Speaker Setting mode
Press the [System Q] button.
3
Select the Speaker type
Press the [4] or [¢] button.
Each time the button is pressed the setting switches as shown
below.
Speaker type
OFF
For 5 & 4 in. speaker
For 6 & 6x9 in. speaker
For the OEM speaker
4
Exit Speaker Setting mode
Press the [System Q] button.

Switching Display

Switching the information displayed.
Press the [DISP] button.
Each time the button is pressed the display switches as shown
below.
Display
"SP OFF"
"SP 5/4Inch"/ "SP 5/4"
"SP 6*9/6Inch"/ "SP 6*9/6"
"SP O.E.M."/ "SP OEM"
— 10 —
In Tuner source
Information
Program Service name or Frequency
Radio text,
Program Service name or Frequency
Clock
The frequency is displayed during Program Service name
reception
Press the [DISP] button for at least 1 second.
The frequency for the RDS station will be displayed for 5
seconds instead of the Program Service name.
In CD & External disc source
KDC-M6024G/M6024/V6524/6024:
Information
Disc title
Track title
Track number & Play time
Disc name
Clock
KDC-5024/5024V/507/5094R :
Information
Disc title (In External disc source)
Track title (In External disc source)
Track number & Play time
Disc name
Clock
Display
"R-TEXT"
Display
"D-TITLE"
"T-TITLE"
"P-Time"
"DNPS"
Display
"D-TITLE"
"T-TITLE"
"P-TIME"
"DNPS"