Selectable Illumination; Menu System; Switching Display Type; Illumination Color Setting - Kenwood KDC-M6024/G Instruction Manual

Menu system

Selectable Illumination

Selecting the button illumination color as green or red.
Display
"Button Red"/ "KEY RED"
"Button Green"/ "KEY GRN"

Switching Display Type

Setting the Display type.
Display Setting
"Display C"/ "DISP C" Demonstration.
"Display A"/ "DISP A" Normal display type.
"Display B"/ "DISP B" Silent display type.

Illumination Color Setting

You can set the display to a desired color.
1
Select Illumination Color Setting Mode
Press the [FM] or [AM] button.
Select the "COL" display.
2
The color continues to change gradually
Hold down on the [4] or [¢] button.
Release your finger at the color you want.
Colors adjusted using either [4] or [¢] will be stored
automatically, and they can be called by pressing [5] button.
Quick call up the preset color
Press the desired [1] — [4] button.
Setting
The illumination color is red.
The illumination color is green.
Function of the KDC-V6524
Button
[1]
[2]
[3]
[4]
Selecting the Color mode
Press the [6] button.
Each time the button is pressed the Color mode switches as
shown below.
Display Color mode
"Scan" The color changes in sequence.
"SRC" The color changes according to the selected source.
"Time" The color changes every 6 hours.
Keeps the presently set color.
Blue fine adjustment
1 Press the [3] button for at least 2 seconds.
2 Press the [4] or [¢] button.
When the blue fine adjustment is completed, press the [3]
button.

Contrast Adjustment

Adjusting the display contrast.
Display and Setting
"Contrast 0"/ "CONT 0"
"Contrast 10"/ "CONT 7"
— 26 —
Color
Silky White
Red
Blue
Blue Green