Initial Settings Before Operations - Kenwood KDC-BT41U Instruction Manual

Cd receiver
Hide thumbs Also See for KDC-BT41U:
Table of Contents

Advertisement

Initial settings before operations

1
Press
SRC to enter [STANDBY] mode.
Press the volume knob to enter [FUNCTION] mode.
2
Turn the volume knob to select [INITIAL SET], then press to enter.
3
Turn the volume knob to make a selection, then press to confirm.
4
See table below for selection.
5
Hold
to finish the procedure.
Item
PRESET TYPE
NORMAL/ NORM *: Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ MW/ LW). ;
MIX: Memorizes one station for each preset button regardless of the selected band (FM1/ FM2/ FM3/ MW/ LW).
KEY BEEP
ON */ OFF: Activates/deactivates the keypress tone.
RUSSIAN SET
ON: Folder name, file name, song title, artist name, album name are displayed in Russian (if applicable). ;
OFF *: Cancels.
P-OFF WAIT
Sets the duration when the unit will automatically turns off (while in standby mode) to save the battery.
––– : Cancels ; 20M *: 20 minutes ; 40M: 40 minutes ; 60M: 60 minutes
BUILT-IN AUX/
ON1 *: Outputs sound of the connected external component through the car speakers when "AUX" is selected as
BUILTIN AUX
the source. ; ON2: Outputs sound from the connected external component when "AUX" is selected as the source.
When you turn on the power, the sound attenuates (to prevent noise when no external component is connected).
Turn the volume knob clockwise to return to the previous volume level. ; OFF: Disables "AUX" in source selection.
CD READ
1*: Automatically distinguishes between audio file disc and music CD. ; 2: Forces to play as a music CD. No sound
can be heard if an audio file disc is played.
SWITCH PREOUT/
REAR */ SUB-W: Selects whether rear speakers or a subwoofer are connected to the line out terminals on the
SWITCH PRE
rear of the unit (through an external amplifier).
SP SELECT
OFF */ 5/4/ 6 × 9/6/ OEM: Selects the speaker size for optimum performance.
F/W UP xx.xx
YES: Starts upgrading the firmware. ; NO *: Cancels (upgrading is not activated).
For details on how to update the firmware, see: www.kenwood.com/cs/ce/
Selectable setting (Preset: *)
7
English

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kdc-bt31uKdc-4751sd

Table of Contents