Timer Operation; Setting The O.t.t - Kenwood NV-500 Instruction Manual

Timer operation

44
O.T.T. :
Starts playback of the selected input source when the set time comes and turns power off in an hour. This
program is executed only once every time after it is set.
Timer playback, timer recording:
Plays the selected input source (or records tuner broadcasting or external input source) in the set time zone.
SLEEP timer:
Turns power off automatically after the set period of time.
When more than one timer setting overlaps
With this unit, the O.T.T. on time, the timer play-
back on time/off time and the timer recording on
time/off time can be set independently. If more
than one timer setting overlaps in a certain pe-
riod, the timer functions are activated in the fol-
lowing priority order:
1 O.T.T.
2 Timer playback
3 Timer recording

Setting the O.T.T.

When the time set by the timer comes, the last source
which was selected before the power was switched off
will be played back.
1 Display the "Function" menu.
2 Select the message to be
displayed, "O.T.T. Off" or
"O.T.T. On".
3 Select the message to be
displayed, "On".
4 Set the timer start time.
To return time To advance time
5 After setting the start
time, press the ENTER
key.
6 After completing the set-
ting, set the power OFF.
SET
CURSOR
SET
CURSOR
SET
CURSOR
SET
4 ¢
–P.CALL–
ENTER
Adjust the clock before setting the timer.
4, ¢
÷ Select "Off" when you want to cancel the O.T.T. timer.
÷ The time is variable in 5-minute steps.
÷ In other areas than the UK, Europe and Australia,
the clock shows the time of the day in the 12-hour
system.
÷ When the timer has been set and power set to OFF ,
the STANDBY/TIMER indicator lights up in amber.
CURSOR
ENTER
SET