Charging Your Band With A Non-Separated Charging Cradle And A Usb Port - Huawei Band 3e Manual

Charging your band with a non-separated charging
cradle and a USB port
Charging
1
Push the band body through the strap to remove it.
2
Align the main body's metal charging contacts with the charging cradle and insert them
into the charging cradle.
3
During charging, the charging icon and battery level will be displayed on the screen, and
the phone will automatically power on. Otherwise, change the charger direction and try
again.
Charge your band in a dry and well-ventilated environment.
Before charging, make sure the charging port is dry. Wipe off any water or sweat stains
to prevent any short-circuiting.
Your band does not come with a charger. Use a Huawei charger with a rated output
voltage of 5 V and a rated output current of 0.5 A or higher, a USB port on your
computer, or a charger that complies with applicable national and regional laws and
regulations as well as international and regional security standards to charge your band.
Other chargers and power banks that do not meet corresponding safety standards may
cause issues such as slow charging and overheating. Exercise caution when using them. It
is recommended that you purchase a Huawei charger from an official Huawei retail
channel.
Charging time
It takes about 2 hours to fully charge the band. After the band is fully charged, it will display
a full charge icon.
Viewing the battery level
View the battery level on the band's watch face when the band screen is on.
•
Alternatively, open the Huawei Health app on the connected phone and touch Devices
•
then your device name to check the battery level of your band.
Low battery alert
When the battery level is lower than 10%, your band will vibrate to notify you of the low
battery level and prompt you to charge your band as soon as possible.
Getting started
6