Viewing The Bluetooth Name And Mac Address - Huawei Band 3e Manual

Once Auto-update device over Wi-Fi or Auto-download update packages over Wi-
•
Fi is enabled, your band will receive an update package from the phone and send you
a notification about the update. Follow the onscreen instructions to update your band.
During an update, Bluetooth on your band will automatically disconnect, and
•
reconnect once the update is complete.
Do not charge your band during the update.
•

Viewing the Bluetooth name and MAC address

Viewing the Bluetooth name:
Method 1: In Wrist mode, tap the touch key below the screen until the
displayed, tap and hold the touch key to enter it. Then tap the touch key to switch to the
screen, and after that tap and hold the touch key to restart the band.
Method 2: Open the Huawei Health app, touch Devices and your device name. The name of
the connected device is the Bluetooth name.
Viewing the MAC address:
Method 1:
Remove the band body from the strap and place the band body on a flat table. Press both
ends of the main body to ensure that the main body is stable. Keep the screen on and stay
on the time screen. Use your knuckle to knock the central position of the display screen
twice, pause for 1 to 2 seconds, and then knock the central position of the display screen
twice to display related information. Press the touch key to switch to the MAC information
screen. The 12 alphanumeric characters next to MAC: is the MAC address.
Updating and MAC address
screen is
20