Sony VAIO Digital Studio PCV-RX490TV Quick Start Manual page 17

Connecting to your computer with the video cable (supplied) and video cable
adapter (supplied)
Connect a standard video cable (supplied) to the jack-end of the video cable
adapter (supplied). Connect the S-video connector end into the S-video port on
the back panel of your computer.
Using the video cable adapter (supplied)
Connect to Video/S-video ports
(on computer)
MIC
4
MONITOR DVI
3
VIDEO VIDEO 1
2 OUTPUT INPUT
S VIDEO S VIDEO
/VIDEO /VIDEO VHF
AUDIO AUDIO /UHF
1
LINE TELEPHONE
Video/S-video Out
(port)
Video/S-video In
(port)
Your VAIO Digital Studio™ Computer is supplied with certain audio and video cables.
(See "Unpacking Your Computer." in this manual) Depending on your in-home cable
access, you may require extra cables, adapters or connection equipment not supplied
with your computer.
To connect a TV monitor (display)
1 Connect the video connector end of the video cable adapter (supplied) to the
Video-OUT connection on the back panel of your computer.
2 Connect the jack end of the video cable adapter to either end of the video
cable (supplied). Connect the other end of the video cable to the Video-IN
jack on your TV monitor or display. (The Video-IN may be located on the
side or rear of your TV monitor/display.)
Setting up additional equipment
Video cable adapter
(supplied)
Video cable
(supplied)
Connect to device
17