Sony VAIO Digital Studio PCV-RX490TV Quick Start Manual page 14

Change to Current Document Title
Option 2
1 Connect one end of the coaxial cable (supplied) to your cable service access.
Connect the other end to the IN jack on the back panel of your set-top box
(STB).
2 Connect a second coaxial cable (optional) to the OUT jack on your STB unit.
Connect the other end to the VHF/UHF jack on the rear of your TV monitor
or display.
3 Connect one end of the video cable (supplied) to the Video Out port on the
back panel of your STB unit. Connect the other end of the video cable to the
jack end of a video cable adapter (supplied).
4 Connect the video connector end of the video cable adapter into the Video/S-
video In port on the back panel of your computer.
14