To Add Or Change A User's Code; To Delete A User - ADT Safewatch Pro 2000 User Manual

To Add a User or
Important: Temporary users of the system (e.g., babysitters, cleaning staff) should not be shown how
Change a User's
to use any system function they do not need to know, such as bypassing protection zones for example.
Code
Sequential key depressions for all steps in a procedure must be made within 2 seconds of one
another, or else the entire entry is aborted and must be repeated from its beginning (e.g.,
perform steps 1, 2, and 3 below with no delay between steps).
1.
Changing your
Master Code
Follow this procedure:
Enter your existing
2.
Master code + [8] + [0][2]
+ new Master code + new
Master code again.
3.

To Delete a User

1.
2.
3.
SECURITY CODES
CODE
+
8
(Master Code)
(User Number)
(User's Code)
CODE
+
8
(Master Code)
(User Number)
-----------
– 26 –
Enter master code, then press CODE key.
Example: 7 2 9
Enter user number. Enter the 2-digit User Number
(03-16) for the user you are adding or changing.
Enter user's code.
Enter the new 4-digit security code for that use r.
Enter master code, then press CODE key.
Example: 7 2 9
Enter user number.
Enter the 2-digit User Number (03-16) for the user whose
code you are deleting.
S t o p .
Wait (about 3 seconds) until the touchpad beeps once
before pressing any other key. The code is automatically
deleted.
6 then press the CODE key.
6 then press the CODE key.