GRAPHTEC CE7000 Series User Manual page 314

Error
LCD Display
Displayed
E05011
E05012
E05013
E05014
E05015
E05016
E05017
E05018
E05019
E05020
E05021
E05022
E05023
Cause
Bar Code cutting is not available when
Mirror is set to ON.
The desired file cannot be found in external
memory (USB memory).
Start mark cannot be scanned.
The selected connection destination
cannot be found.
There is no appropriate cutting data for the
data link server.
The communication to the data link server
is not established.
Media set lever is lowered.
A trouble occurs in the data link server.
A trouble occurs in communication to the
data link server.
The connection destination is not USB
memory
The type of bar code is different.
Media skew is detected.
Data link server is not activated.
15-14
Solution
Set Mirror is set to OFF to use Bar Code
cutting.
Save the desired file in external memory
(USB memory).
Check the print result of start mark.
Move the tool carriage above the start mark.
Connect to the selected connection
destination using USB or LAN cable.
Check the data link server.
Check the data link server.
Increase the time until the timeout.
Set the media again.
Restart the data link server.
Set the media again.
Turn the power off and then on again
Set connection destination to USB memory.
Apply the appropriate bar code.
Set the media again.
Increase the skew detection set value.
Activate data link server.