Related Manuals for Toro 22521
Summary of Contents for Toro 22521
- Page 1 Form No. 3396-720 Rev B Grapple Rake Compact Utility Loaders Model No. 22521—Serial No. 270000001 and Up *3396-720* B Register at www.Toro.com. Original Instructions (EN)
-
Page 2: Table Of Contents
Maintenance ..............7 Recommended Maintenance Schedule(s) ....... 7 Greasing the Pivot Points ......... 7 This grapple rake is intended to be used on a Toro compact Storage ................. 7 utility loader. It is designed primarily for grabbing, dragging, lifting, and removing materials without picking up topsoil on residential or commercial properties. -
Page 3: Safety
Always close the grapple’s jaws each time you shut or death. off the traction unit. To ensure optimum performance and continued safety certification of the machine, use only genuine Toro WARNING replacement parts and accessories. Replacement parts and accessories made by other manufacturers could be dangerous, If you step off the platform (wheeled traction units and such use could void the product warranty. -
Page 4: Stability Ratings
WARNING Orientation Stability Rating with a Load Front Uphill If you do not fully seat the attachment locking pins in the attachment mount plate holes, the attachment could fall off the traction unit, severely injuring the operator or bystanders. Rear Uphill •... -
Page 5: Safety And Instructional Decals
A selection of Toro approved attachments and accessories is available for use with the machine to enhance and expand its capabilities. Contact your Authorized Service Dealer or Distributor or go to www.Toro.com for a list of all approved attachments and accessories. -
Page 6: Operation
Operation Refer to your traction unit Operator’s Manual for more information on installing and removing attachments on your traction unit. Important: Always use the traction unit to lift and move the attachment. Lifting Objects Use the attachment to grab and lift heavy objects such as logs and rocks. -
Page 7: Maintenance
Maintenance Recommended Maintenance Schedule(s) Maintenance Service Maintenance Procedure Interval • Grease the pivot joints (and immediately after every washing). Before each use or daily • Paint chipped surfaces. Before storage CAUTION If you leave the key in the traction unit ignition switch while the grapple rake is attached, someone could accidently start the engine and seriously injure you or other bystanders. - Page 8 Notes:...
- Page 9 Notes:...
- Page 10 The method of transmission shall be electronic transmittal. This machinery shall not be put into service until incorporated into approved Toro models as indicated on the associated Declaration of Conformity and in accordance with all instructions, whereby it can be declared in conformity with all relevant Directives.
- Page 11 The Way Toro Uses Information Toro may use your personal information to process warranty claims, to contact you in the event of a product recall and for any other purpose which we tell you about. Toro may share your information with Toro's affiliates, dealers or other business partners in connection with any of these activities. We will not sell your personal information to any other company.
- Page 12 Toro importer. If all other remedies fail, you may contact us at Toro Warranty Company. Australian Consumer Law: Australian customers will find details relating to the Australian Consumer Law either inside the box or at your local Toro Dealer.