Jumper Settings For The Kc705 Board; Jumper Settings For The Vc707 Board; Jumper Settings For The Zc702 Board - Xilinx AMS101 User Manual

Required Jumper Settings for Base
Boards

Jumper Settings for the KC705 Board

Note:
To enable AMS evaluation, ensure the KC705 board has the following jumper settings:
•
•
•
•
•
•
See KC705 Evaluation Board for the Kintex-7 FPGA User Guide (UG810)

Jumper Settings for the VC707 Board

To enable AMS evaluation, ensure the VC707 board has the following jumper settings:
•
•
•
•
•
•
See VC707 Evaluation Board for the Virtex-7 FPGA User Guide (UG885)

Jumper Settings for the ZC702 Board

To enable AMS evaluation, ensure the ZC702 board has the following jumper settings:
•
•
•
•
•
AMS101 Evaluation Card User Guide
UG886 (v1.3) November 6, 2013
The triangle indicates pin 1 for jumper settings on all Xilinx base boards.
J43: In place
J68: In place
J48: In place between pins 2 and 3
J69: In place between pins 1 and 2
J47: In place between pins 1 and 2
J42: Not in place
J10: In place
J53: In place
J43: In place between pins 2 and 3
J54: In place between pins 1 and 2
J42: In place between pins 1 and 2
J9: Not in place
J8: Not in place
J9: In place
J65: In place
J37: In place between pins 1 and 2
J38: In place between pins 2 and 3
www.xilinx.com
Appendix B
[Ref 7].
[Ref 8].
51