Page 1
BN68-00448A-04Eng_02 10/27/03 9:45 AM O U R Rear Panel Jacks Use the rear panel jacks to connect an A/V component that will be connected continuously, such as a VCR or a DVD player. VIDEO/AUDIO OUTPUT VIDEO/AUDIO INPUT SUPER VIDEO INPUT...
TV. If you have a “mono” (non-stereo) VCR, use the Y-connector (not supplied) to hook up to the left and right audio input jacks of the TV. If your VCR is stereo, you must connect two cables.
Connecting an External Input Source Connect the Input/AUDIO cables to the Input/AUDIO OUT jacks on the TV and the Input/AUDIO IN jacks on the VCR (Connect the cables to the jacks of the same color.) Connect a set of audio cables...
Page 13 N S TA L L AT I O N Connecting a DVD Player The rear panel jacks on your TV make it easy to connect a DVD player to your TV. Connect a set of audio cables between the...
5.1. Channel system: 5 Channels – 2 Channels for the front (left and right), How to Connect 1. Connect the speaker cables to the Speaker OUT jacks on the TV and the IN jacks on the speakers. 2. Connect the Subwoofer OUT jack on the TV to the Subwoofer.
6/28/03 8:15 AM Page 15 N S TA L L AT I O N Connecting a PC Note: This figure shows the Standard Connector-jack panel. The actual configuration on your TV may be different, depending on the model. DVI-D TV rear panel...