LCD TV user manual imagine the possibilities Thank you for purchasing a Samsung product. To receive a more complete service, please register your product at www.samsung.com/global/register Model Serial No.
(SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally provide Warranty Repair Service in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products purchased in the United States, for the warranty period originally specified, and to the Original Purchaser only.
Contents GENERAL INFORMATION CHANNEL CONTROL List of Features ................2 Clearing Scrambled Channels - Digital ........39 Accessories .................. 2 Adding and Erasing Channels ............ 40 Viewing the Control Panel ............3 To Set-Up Your Favorite Channels ..........41 Viewing the Connection Panel ............ 4 Using the Channel Lists - Analog ..........
General Information List of Features Adjustable picture settings that can be stored in the TV’s memory. Automatic timer to turn the TV on and off. A special sleep timer. Excellent Digital Interface & Networking : With a built-in HD digital tuner, non-subscription HD broadcasts can be viewed with no Cable Box/Satellite receiver (Set-Top Box) needed.
Viewing the Control Panel Buttons on the Lower-Right Part of the Panel The buttons on the lower-right panel control your TV’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control. Side Panel buttons The product color and shape may vary depending on the model.
Viewing the Connection Panel Use the connection panel jacks to connect A/V components that will be connected continuously, such as DVD players or a VCR. For more information on connecting equipment, see pages 7~20. LN26A450C1D, LN40A450C1D [TV Side Panel] [TV Rear Panel] LN32A450C1D, LN37A450C1D [TV Side Panel] [TV Rear Panel]...
Page 7
1 AUDIO OUT Connects to the audio input jacks on your Amplifier/Home theater. 2 DIGITAL AUDIO OUT (OPTICAL) Connects to a Digital Audio component. 3 PC IN [PC] / [AUDIO] Connects to the video and audio output jacks on your PC. 4 HDMI IN 1, 2, 3 / DVI IN(HDMI2)[R-AUDIO-L] (LN26A450C1D, LN40A450C1D) Connects to the HDMI jack of a device with an HDMI output.
# Use these buttons in the DMA and Picture size selection. Anynet+ modes. : This remote can be used to control recording on Samsung recorders with the Anynet + feature) The performance of the remote control may be affected by bright light.
Installing Batteries in the Remote Control 1. Lift the cover at the back of the remote control upward as shown in the figure. 2. Install two AAA size batteries. Make sure to match the "+" and "–" ends of the batteries with the diagram inside the compartment. 3.
Connecting Cable TV To connect to a cable TV system, follow the instructions below. Cable without a Cable Box 1. Plug the incoming cable into the ANT IN terminal on the back of the TV. ANT IN Because this TV is cable-ready, you do not need a cable box to view unscrambled cable channels. Connecting to a Cable Box that Descrambles All Channels 1.
Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) via HDMI This connection can only be made if there is an HDMI Output connector on the external device. 1. Connect an HDMI Cable TV Side Panel DVD Player or Cable Box/Satellite receiver between the HDMI IN (1, 2 TV Rear Panel (Set-Top Box) Rear Panel...
Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) via Component cables The rear panel jacks on your TV make it easy to connect a DVD Player or Cable Box/Satellite receiver (Set-Top Box) to your TV. 1. Connect a Component Cable TV Rear Panel between the COMPONENT IN (1 or 2) [Y, P...
(Yellow). S-Video Connection Your Samsung TV can be connected to an S-Video jack on a VCR. (This connection delivers a better picture when compared to the regular Video connection above.) 1. To begin, follow steps 1–3...
Connecting a Digital Audio System The rear panel jacks on your TV make it easy to connect a Digital Audio System (Home theater/Receiver) to your TV. 1. Connect an Optical Cable Digital Audio System between the “DIGITAL AUDIO TV Rear Panel OUT (OPTICAL)”...
Connecting a PC Using the D-Sub Cable 1. Connect a D-Sub Cable TV Rear Panel between PC IN [PC] connector on the TV and the PC output connector on your computer. 2. Connect a PC Audio Cable between the PC IN [AUDIO] jack on the TV and the Audio Out jack of the sound card on your computer.
Connections (LN32A450C1D, LN37A450C1D) Connecting VHF and UHF Antennas If your antenna has a set of leads that look like the diagram to the right, see "Antennas with 300 Flat Twin Leads" below. If your antenna has one lead that looks like the diagram to the right, see "Antennas with 75 ...
Connecting Cable TV To connect to a cable TV system, follow the instructions below. Cable without a Cable Box 1. Plug the incoming cable into the ANT IN terminal on the back of the TV. ANT IN Because this TV is cable-ready, you do not need a cable box to view unscrambled cable channels. Connecting to a Cable Box that Descrambles All Channels 1.
Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) via HDMI This connection can only be made if there is an HDMI Output connector on the external device. 1. Connect an HDMI Cable between TV Rear Panel DVD Player or Cable Box/Satellite TV Side Panel the HDMI IN (1, 2 or 3) jack on the receiver (Set-Top Box) Rear Panel...
Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) via Component cables The rear panel jacks on your TV make it easy to connect a DVD Player or Cable Box/Satellite receiver (Set-Top Box) to your TV. 1. Connect a Component Cable TV Rear Panel between the COMPONENT IN (1 or 2) [Y, P...
(Yellow). S-Video Connection Your Samsung TV can be connected to an S-Video jack on a VCR. (This connection delivers a better picture when compared to the regular Video connection above.) TV Rear Panel 1.
Connecting a Digital Audio System The rear panel jacks on your TV make it easy to connect a Digital Audio System (Home theater/Receiver) to your TV. 1. Connect an Optical Cable between the “DIGITAL AUDIO OUT Digital Audio System TV Rear Panel (OPTICAL)”...
Connecting a PC Using the D-Sub Cable 1. Connect a D-Sub Cable between PC IN [PC] connector on the TV TV Rear Panel and the PC output connector on your computer. 2. Connect a PC Audio Cable between the PC IN [AUDIO] jack on the TV and the Audio Out jack of the sound card on your computer.
Operation Turning the TV On and Off Press the POWER button on the remote control. You can also use the POWER button on the TV. Plug & Play Feature When the TV is initially powered on, basic settings proceed automatically and Plug &...
Auto Program Plug & Play Auto Program is completed. 75 Channels are memorized. DTV Air : 24 Air : 1 DTV Cable : 17 Cable : 33 Enter Skip 6. Press the ENTER button. Plug & Play Press the button to select “Auto”, then Press the ENTER button.
Using the Button button is used to select stations that broadcast a digital signal. 1. For example, for Channel 7-1, press 7, then , then 1. HD indicates the TV is receiving a Digital High Definition signal. SD indicates the TV is receiving a Standard Definition signal. For quick channel change, press the number buttons, then press the ENTER button.
Using the TOOLS Button You can use the TOOLS button to select your frequently used functions quickly and easily. The “Tools” menu changes depending on which external input mode you are viewing. 1. Press the TOOLS button. The “Tools” menu will appear. Tools 2.
Page 27
Storing Channels in Memory (Automatic Method) 1. Press the MENU button to display the menu. Channel Press the button to select “Channel”, then press the ENTER button. Antenna : Air 2. Press the Auto Program button to select "Auto Program", then press the ENTER button.
To Select the Source Use to select TV or other external input sources such as DVD players or Cable Box/ Input Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source Source List : TV of your choice. Edit Name Anynet+ (HDMI-CEC) 1.
Picture Control Changing the Picture Standard You can activate either Dynamic, Standard, Movie by making a selection from the menu. 1. Press the MENU button to display the menu. Picture Press the ENTER button, to select “Picture”. Mode : Standard Backlight Contrast Brightness...
Adjusting the Detailed Settings Samsung's new TVs allow you to make even more precise picture settings than previous models. See below to adjust detailed picture settings. Activating Detailed Settings Picture Mode : Movie 1. Press the MENU button to display the menu.
Page 31
Adjusting the Gamma Detailed Settings You can adjust the Primary Color (Red, Green, Blue) Intensity. (-3 ~ +3) Black Adjust : Off 8. Press the Dynamic Contrast : Off button to select “Gamma”, then press the ENTER button. Gamma 9. Press the Color Space button to decrease or increase the value.
Page 32
Adjusting the White Balance Detailed Settings Black Adjust : Off You can adjust the color temperature for more natural picture colors. Dynamic Contrast : Off 17. Press the button to select “White Balance”, then press the ENTER Gamma Color Space button.
Con¿guring Picture Options Activating Picture Options 1. Press the MENU button to display the menu. Press the ENTER button, to select “Picture”. Picture 2. Press the button to select "Picture Options", then press the More ENTER button. Detailed Settings Picture Options Press the button to select a particular item.
Page 34
Temporary image retention may occur when viewing a static image on the set Size for more than two hours. 16 : 9 Zoom1 Position Reset After selecting “Zoom1”, “Zoom2” or “Wide Fit”: Zoom2 Press the button to select “Position”, then press the ENTER Wide Fit button.
Page 35
Setting the Digital Noise Reduction If the broadcast signal received by your TV is weak, you can activate the Digital Noise Picture Options Reduction feature to help reduce any static and ghosting that may appear on the screen. Color Tone : Normal Size : 16:9...
Setting the Film Mode The TV can be set to automatically sense and process ¿lm signals from all sources and Picture Options adjust the picture for optimum quality. Color Tone : Normal Size : 16:9 1. Follow the “Activating Picture Options” instructions numbers 1 and 2. Digital NR : Auto (Refer to page 29)
Sound Control Changing the Sound Standard You can select the sound mode to best suit the programming you’re watching. Sound 1. Press the MENU button to display the menu. Mode : Custom Press the button to select "Sound", then press the ENTER button.
Setting the TruSurround XT TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats. 1.
Choosing a Multi-Channel Sound (MTS) track - Analog Multi-Track Sound Multi-Track Options 1. Press the MENU button to display the menu. Preferred Language : English Press the button to select "Sound", then press the ENTER button. Multi-Track Sound : Stereo 2.
Setting the TV Speakers On/Off Sound output from the TV speakers is muted. Sound 1. Press the MENU button to display the menu. Mode : Custom Press the button to select "Sound", then press the ENTER button. Equalizer SRS TruSurround XT : Off 2.
Channel Control Clearing Scrambled Channels - Digital The Clear Scrambled Channel function is used to ¿lter out scrambled channels after Auto Program is completed. This process may take up to 20~30 minutes. 1. Press the MENU button to display the menu. Channel Press the button to select "Channel", then press the ENTER...
Adding and Erasing Channels Using this menu, you can Add/Delete or set Favorite channels and use the program guide for digital broadcasts. To use the Channel List function, ¿rst run “Auto Program” (see page 25). 1. Press the MENU button to display the menu. Channel Antenna : Cable...
To Set-Up Your Favorite Channels You can set channels you watch frequently as favorites. 1. Press the MENU button to display the menu. Press the button to select "Channel", then press the ENTER button. Channel Antenna : Cable 2. Press the button to select "Channel List", then press the ENTER button.
Using the Channel Lists - Analog Displays the channel list automatically when you press CH LIST button on the remote. (Choose “All”, “Added” or “Favorite”) 1. Press the MENU button to display the menu. Channel Press the button to select "Channel", then press the ENTER button.
Labeling Channels Channels can be labeled so that their call letters appear whenever the channel is selected. Channel 1. Press the MENU button to display the menu. Antenna : Air Press the button to select “Channel”, then press the ENTER button.
Fine Tuning Analog Channels Use ¿ne tuning to manually adjust a particular channel for optimal reception. 1. Press the MENU button to display the menu. Channel Press the button to select "Channel", then press the ENTER button. Antenna : Air Auto Program 2.
Windows and your particular video card. However, even if your actual screens look different, the same basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.) 1.
Setting up the TV with your PC How to Auto Adjust Use the Auto Adjust function to have the TV set automatically adjust the video signals it receives. The function also automatically ¿ne-tunes the settings and adjusts the frequency values and positions. This function does not work in DVI-Digital mode.
Page 49
Changing the Screen Position Adjust the PC’s screen positioning if it does not fit the TV screen. Preset: Press the SOURCE button to select PC mode. Screen Image Lock 1. Press the MENU button to display the menu. Position Press the button to select "Picture", then press the ENTER button.
Time Setting Setting the Clock Setting the clock is necessary in order to use the various timer features of the TV. Also, you can check the time while watching the TV. (Just press the INFO button.) Option 1: Setting the Clock Manually 1.
Page 51
Option 2: Setting the Clock Automatically The Clock can be set automatically if you are receiving a digital signal. Setup Plug & Play 1. Press the MENU button to display the menu. Language : English Press the button to select "Setup", then press the ENTER button.
Page 52
Setting the Sleep Timer The sleep timer automatically shuts off the TV after a preset time (30, 60, 90, 120, 150 and 180 minutes). 1. Press the MENU button to display the menu. Time Press the button to select "Setup", then press the ENTER button.
Setting the On/Off Timer 1. Press the MENU button to display the menu. Press the button to select "Setup", then press the ENTER button. Time Press the button to select "Time", then press the ENTER button. 1/ 1/2008 12 : 00 am 2.
Using the V-Chip The V-Chip feature automatically locks out programs that are deemed inappropriate for children. The user must enter a PIN (personal ID number) before any of the V-Chip restrictions are set up or changed. “V-Chip” function is not available in HDMI, component or PC mode. The Screen Saver is activated if there is no remote control key input for longer than 1 minute while setting up the “V-Chip”.
Page 55
How to Enable/Disable the V-Chip 1. Press the MENU button to display the menu. Setup Press the button to select "Setup", then press the ENTER button. Plug & Play Language : English 2. Press the button to select “V-Chip”, then press the ENTER button.
Page 56
3. The “V-Chip” screen will appear. Press the button to select “TV Parental V-Chip Guidelines”, then press the ENTER button. V-Chip Lock : On TV Parental Guidelines MPAA Rating Canadian English Canadian French Downloadable U.S. Rating Change PIN Move Enter Return 4.
Page 57
How to Set up Restrictions Using the MPAA Ratings: G, PG, PG-13, R, NC-17, X, NR The MPAA rating system uses the Motion Picture Association of America (MPAA) system and its main application is for movies. When the V-Chip lock is on, the TV will automatically block any programs that are coded with objectionable ratings (either MPAA or TV-Ratings).
Page 58
How to Set up Restrictions Using the ‘Canadian English’ 1. Press the MENU button to display the menu. Setup Press the button to select “Setup”, then press the ENTER button. Plug & Play 2. Press the button to select “V-Chip”, then press the ENTER button.
Page 59
How to Set up Restrictions Using the ‘Canadian French’ 1. Press the MENU button to display the menu. Press the button to select “Setup”, then press the ENTER button. Setup Plug & Play 2. Press the button to select “V-Chip”, then press the ENTER button.
Page 60
Using the V-Chip for Digital channels Parental restriction information can be used while watching DTV channels. 1. Press the MENU button to display the menu. Setup Plug & Play Press the button to select “Setup”, then press the ENTER button. Language : English Time...
Viewing Closed Captions (On-Screen Text Messages) - Analog The Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an external device to TV. (Depending on the broadcasting signal, the Analog Caption function may operate on digital channels.) 1.
Viewing Closed Captions (On-Screen Text Messages) - Digital The Digital Captions function operates on digital channels. 1. Press the MENU button to display the menu. Press the button to select “Setup”, then press the ENTER button. Caption 2. Press the Caption button to select “Caption”, then press the ENTER button.
Adjusting the TV On/Off Melody Sound A melody sound can be set to come on when the TV is powered On or Off. Setup 1. Press the MENU button to display the menu. Plug & Play Language : English Press the button to select "Setup", then press the ENTER button.
Upgrading the Software Samsung may offer upgrades for TV's firmware in the future. Please contact the Samsung call center at 1-800-SAMSUNG (726-7864) to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a USB drive to the USB port located on your TV.
Connecting Anynet Devices The Anynet + system can be used only with Samsung devices that have the Anynet + feature. To be sure your Samsung device has this feature, check if there is an Anynet + logo on it. To connect to a TV...
Setting Up Anynet The following settings help set the Anynet + functions. To use the Anynet Function, Anynet (HDMI-CEC) must be set to On Press the TOOLS button. Press the ENTER button to select “Anynet+(HDMI-CEC)”. Air 28 Press the button to select "Setup", then press the ENTER button.
Anynet Menu The Anynet + menu changes depending on the type and status of the Anynet + devices connected to the TV. Anynet + Menu Description Switches from Anynet + to TV broadcast mode. View TV Record Starts a recording. (This menu works only for a device supporting recording.) (Device_Name) Menu Shows the menu of the connected device.
Listening through a Receiver (Home theater) You can listen to sound through a receiver instead of the TV speaker. Air 28 Press the TOOLS button. Recevier: Press the ENTER button to select “Anynet+(HDMI-CEC)”. Press the button to select "Receiver", then press the ENTER button.
Appendix Troubleshooting If the TV seems to have a problem, ¿rst try this list of possible problems and solutions. If none of these troubleshooting tips apply, call Samsung customer service at 1-800-SAMSUNG. Problem Possible Solution Poor picture Try another channel.
Page 70
Problem Possible Solution Horizontal bars appear to flicker, Adjust the Coarse tuning and then adjust the Fine tuning. jitter or shimmer on the image. Vertical bars appear to flicker, Adjust the Coarse tuning and then adjust the Fine tuning. jitter or shimmer on the image. Screen is black and power On your computer check: Power, Signal Cable.
Installing the Stand 1. Attach your LCD TV to the stand. Two or more people should carry the TV. Make sure to distinguish between the front and back of the stand when attaching it. To make sure the TV is installed on the stand at a proper level, do not apply excess downward pressure to the upper left of right sides of the TV.
Auto Wall-Mount Adjustment (Sold separately) (LN32A450C1D, LN37A450C1D, LN40A450C1D) Once the auto wall mount is installed, your TV’s position can be easily adjusted. Auto Wall-Mount TV Rear Panel EX-LINK Cable (Not supplied) Entering the menu External Settings 1. Press the button on your remote control. Melody : Medium The Wall Mount Adjustment screen is displayed.
Do not use fasten the screws too strongly, this may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents. Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions.
Using the Anti-Theft Kensington Lock The Kensington Lock is a device used to physically ¿x the system when using it in a public place. The locking device has to be purchased separately. The appearance and locking method may differ from the illustration depending on the manu- facturer.
Speci¿cations Model Name LN26A450C1D LN32A450C1D Screen Size (Diagonal) 26 inches 32 inches PC Resolution 1360 x 768 @ 60 Hz 1360 x 768 @ 60 Hz Sound Output 5W x 2 10W x 2 Dimensions (WxDxH) Body 26.4 X 3.0 X 17.7 inches 31.5 X 3.1 X 20.7 inches (669.7 X 75.1 X 450.7 mm) (799.6 X 79 X 525.2 mm)
Page 80
Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Contacte con SAMSUNG WORLDWIDE Si tiene alguna pregunta o comentario referente a nuestros productos, por favor contacte con nuestro Servicio de Atención al Cliente.
Page 81
1-800-SAMSUNG (7267864) Samsung Electronics America, Inc. 105 Challenger Road Ridgefield Park, NJ 07660-0511 Samsung Electronics Canada Inc., Customer Service 55 Standish Court Mississauga, Ontario L5R 4B2 Call center hours of operation (Mon-Sun 9AM-12AM EST). To register this product please visit www.samsung.com/global/register.
Page 82
Rear Panel / Side Panel Jacks (LN32A450C1D, LN37A450C1D) SERVICE COMPONENT IN 1, 2 / AV IN 1 KENSINGTON LOCK DIGITAL AUDIO OUT (OPTICAL) ANT IN POWER INPUT PC IN [PC] / [AUDIO] HDMI IN 1, 2, 3 / DVI IN (HDMI1) AV IN 2 [R-AUDIO-L] AUDIO OUT...
Page 83
Press to exit the menu. Used to display Channel Lists on the screen. DMA (Digital Media Adapter) TOOLS Use this when connecting a SAMSUNG DMA device Use to quickly select frequently through an HDMI interface and used functions. switching to DMA mode. INFO...
Page 84
Connections (LN26A450C1D, LN40A450C1D) Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) via HDMI Connect an HDMI Cable between TV Side Panel the HDMI IN (1, 2 or 3) jack on the TV and the HDMI jack on the TV Rear Panel DVD Player or Cable Box/Satellite receiver (Set-Top Box).
Page 85
Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) via Component cables Connect a Component Cable between TV Rear Panel the COMPONENT IN (1 or 2) [Y, P ] jacks on the TV and the COMPONENT [Y, P ] jacks on the DVD Player or Cable Box/Satellite receiver (Set-Top Box).
Connecting a VCR Video Connection Unplug the cable or antenna TV Side Panel TV Rear Panel from the back of the TV. VCR Rear Panel Connect the cable or antenna to the ANT IN terminal on the back of the VCR. Connect an RF Cable between the ANT OUT terminal on the VCR and the ANT IN terminal...
Page 87
Connecting a Digital Audio System Connect an Optical Cable between TV Rear Panel the “DIGITAL AUDIO OUT (OPTICAL)” jacks on the TV and the Digital Audio Input jacks on the Digital Audio System. Digital Audio System When a Digital Audio System is connected to the “DIGITAL AUDIO OUT (OPTICAL)”...
Page 88
Connecting a PC Using the D-Sub Cable TV Rear Panel Connect a D-Sub Cable between PC IN [PC] connector on the TV and the PC output connector on your computer. Connect a PC Audio Cable between the PC IN [AUDIO] jack on the TV and the Audio Out jack of the sound card on your computer.
Page 89
Connections (LN32A450C1D, LN37A450C1D) Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) via HDMI Connect an HDMI Cable between TV Side Panel TV Rear Panel the HDMI IN (1, 2 or 3) jack on the TV and the HDMI jack on the DVD Player or Cable Box/Satellite receiver (Set-Top Box).
Page 90
Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) via Component cables Connect a Component Cable TV Rear Panel between the COMPONENT IN (1 or 2) [Y, P ] jacks on the TV and the COMPONENT [Y, P ] jacks on the DVD Player or Cable Box/Satellite receiver (Set-Top Box).
Page 91
Connecting a VCR Video Connection Unplug the cable or antenna TV Rear Panel from the back of the TV. Connect the cable or antenna TV Side Panel to the ANT IN terminal on the back of the VCR. VCR Rear Panel Connect an RF Cable between the ANT OUT terminal on the VCR and the ANT IN terminal...
Page 92
Connecting a Digital Audio System Connect an Optical Cable between TV Rear Panel the “DIGITAL AUDIO OUT (OPTICAL)” jacks on the TV and the Digital Audio Input jacks on the Digital Audio System. Digital Audio System When a Digital Audio System is connected to the “DIGITAL AUDIO OUT (OPTICAL)”...
Page 93
Connecting a PC Using the D-Sub Cable TV Rear Panel Connect a D-Sub Cable between PC IN [PC] connector on the TV and the PC output connector on your computer. Connect a PC Audio Cable between the PC IN [AUDIO] jack on the TV and the Audio Out jack of the sound card on your computer.
Turning the TV On and Off The TV begins memorizing all available stations. After all the available channels are stored, it start to remove scrambled channels. Press the POWER button on the remote control. Press the EXIT button to exit. You can also use the POWER button on the TV.
Setting the Channel List Picture Mode Using this menu, you can Add/Delete or set Favorite • Dynamic: Selects the picture for high-definition in a bright channels and use the program guide for digital broadcasts. room. To use the Channel List function, first run “Auto Program”. •...
Page 96
To Select the Source Source List : ---- : ---- S-Video : ---- Component1 : ---- Component2 : ---- : ---- more Move Enter Return Press the SOURCE button on the Remote Control You can select the TV mode or an input source connected to the TV set. Use this button to choose an input source that you would like to watch.
Page 97
Troubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, call your nearest Samsung service center. Problem Possible Solution Poor picture Try another channel. / Adjust the antenna. / Check all wire connections.
Page 98
Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Contacte con SAMSUNG WORLDWIDE Si tiene alguna pregunta o comentario referente a nuestros productos, por favor contacte con nuestro Servicio de Atención al Cliente.