Tc/Ub; Rec Counter; Time Stamp - Panasonic AG-CX350 Manual

[RECORDING] MENU

3-1-58. TC/UB

Menu item
TC PRESET Set the timecode value.
UB PRESET Set the users bit information.
FREE/REC RUN Set the timecode count mode (*1)
Set the timecode drop frame
DF/NDF
mode.
Set information type, to be
recorded and output from SDI
OUT.
UB MODE
Set purpose of TC IN/OUT
TC IN/OUT SEL
terminal.
Make value offset for the output
timecode.
TC OUT REF
*1 Notes about the Timecode count mode
Fixed to "REC RUN" while the following menu items are set as follows.
- MENU > SCENE FILE > VFR > ON
- MENU > SYSTEM > SUPER SLOW > ON
- MENU > RECORDING > REC FUNCTION > REC MODE > INTERVAL
Fixed to "FREE RUN" while the following menu items are set as follows.
- MENU > RECORDING > PRE REC > ON
- MENU > RECORDING > 2SLOT FUNC. > BACKGR REC (Background record mode)

3-1-59. REC COUNTER

Menu item
Set the counting method of record
REC COUNTER
counter.

3-1-60. TIME STAMP

Menu item
Allows recording of superimposed
TIME STAMP
date and time on the image.
*TIME STAMP feature does not function while in V-Log mode (MENU > SYSTEM > COLOR).
The AG-CX350 Book: MENU operation
Description
Description
Description
Value (Factory default underlined)
---
00 – FF
FREE RUN, REC RUN
DF, NDF
FRAME RATE
Frame rate information
USER
Information, set on SET UB menu
item
TIME
Hour, Minute, Second information
DATE
Year, Month, Day information
CLIP NAME
Clip name information
TC IN: Use as TC input terminal
TC OUT: Use as TC output terminal
RECORDING
Output timecode without delay.
SDI OUT
Output timecode with delay so that
the value meets timing with SDI OUT
image.
Value
TOTAL: Cumulate until RESET
button is pressed
CLIP: Reset to zero at the start of
every clip recording
Value
OFF, DATE, TIME, DATE&TIME
45