Panasonic AG-CX350 Manual page 20

20
The AG-CX350 Book: Preparation before recording
2-5-2. Assignable functions (Continued)
( ) : Features that turn OFF when switch off the unit.
Menu item
LEVEL GAUGE
LEVEL GAUGE SET
LOAD SETUP FILE
MENU
O.I.S.
O.I.S. mode
ONE PUSH AF
( ) PEAKING
PRE REC
REC CHECK
( ) S.GAIN
SLOT SEL
( ) SPOTLIGHT
( ) STREAMING
START
SUPER SLOW
( ) VF ON/OFF
VFR
( ) WFM
( ) Y GET
ZEBRA
Display a level gauge on the viewfinder for the horizontal and vertical
axes. Inclinations can be indicated up to approx. 30 degrees in the
horizontal, and the vertical directions.
Set the current angle as level gauge reference.
Recall set up file (setting data) from an SD memory card.
Open MENU.
Turn ON/OFF the optical image stabilizer.
OIS characteristic customization. (NORMAL, PAN/TILT, STABLE)
Focus mode becomes AUTO while keep pressing the USER button.
Turn ON/OFF peaking and square focus assist function.
Turn ON/OFF the pre-record mode. This mode allows the camera to
start recording video and audio from approx. 3 to 10 sec before the
REC/PAUSE button is pressed.
Plays last 3 sec of the last recorded clip on the SD memory card.
Turn ON/OFF super gain function that allows boosting image gain 24dB
or higher.
Switch memory card slots for recording/playing back.
Switch auto iris mode to Spotlight mode. The spotlight mode optimizes
iris control behavior when the contrast around the subject is high
(example: the subject is a spot light etc.)
Start/stop video streaming distribution from the AG-CX350.
Turn ON/OFF super slow record mode.
Turn ON/OFF the EVF display.
Enable/disable variable frame rate record function.
Display the Waveform or Vector scope on the built-in LCD monitor.
Set MENU > VIDEO OUT/LCD/VF > EI ASSIST > WFM mode to select
the item (Waveform or Vector scope).
Turn ON/OFF the spot meter function.
Turn ON/OFF the ZEBRA indicator.
Description