NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
Steps
1. Remove the
optical
drive.
2. Remove the
base
cover.
3. Remove the
wireless
card.
Procedure
Steps
1. Remove the battery cable from the system board.
2. Note the display cable routing and remove the cable from its routing guides.
3. Lift the latch and disconnect the display cable from the system board.
1. display cable
3. latch
4. Remove the screws that secure the display hinges to the palm rest and keyboard assembly.
5. Open the display hinges.
Removing the display assembly
computer. After working inside your computer, follow the instructions in
2. system board
4. routing guides
After working
www.dell.com/
Removing the display assembly
31
57