NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
Steps
1. Remove the
optical
drive.
2. Remove the
base
cover.
3. Remove the
I/O
board.
4. Remove the
hard
drive.
5. Remove the battery.
Procedure
Steps
1. Open the latch and disconnect the status-light board cable from the system board.
2. Disconnect the speaker cable from the system board.
3. Remove the speaker cable from the routing guides on the palm rest and keyboard assembly.
4. Lift the speakers along with its cable off the palm rest and keyboard assembly.
1. system board
3. speakers (2)
42
Removing the speakers
Removing the speakers
computer. After working inside your computer, follow the instructions in
2. speaker cable
4. palm rest and keyboard assembly
23
After working
www.dell.com/