TEST CAB TIPPING STOPPER
CAB AND ITS ATTACHMENTS
TEST CAB TIPPING STOPPER
For testing cab tipping stopper, refer to this section.
METHOD FOR TESTING CAB TIPPING STOPPER
Check the tightening torque of mounting bolt (2) of lock plate
3
(1).
Bolt (2):
98 to 123 Nm {10 to 12.5 kgm}
Note that the tightening torque for mounting bolt (4) of cab tip-
ping stopper (3) is different from that of a common bolt whose
thread diameter is 30 mm.
3
Bolt (4):
245 to 309 Nm {25 to 31.5 kgm}
30-104
30 TESTING AND ADJUSTING
PC500LC-10R