HP 98700 Graphics Display Station
d. Set the HP 98700 on top of the HP 98710A, making sure the guide pins
enter the guide pin sockets.
e. Gently but firmly press the HP 98700 down until the connector engages
and seats (see Figure 8-4).
Figure 8-4.
Connecting the HP 98700 to the HP 98710A
f. Slide the locking mechanism forward to lock the two together.
3. Place the HP 98700/98710 between the computer and the monitor.
4. Connect the RGB cables to the monitor, observing the color coding of the
cables: red to red, blue to blue and green to green.
5. Connect the other end of the cables to the HP 98700 in the same manner.
6. Connect the interconnect cable to the HP 98287 A Graphics Display Station
Interface. The cable connector key projects outward near the top from each
end of the connector shell. Ensure that this is UP when connecting to the
interface or the HP 98700.
8-14
Adding Plotters & Other
Graphics Devices