Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Toro Power Plex 88540
Summary of Contents for Toro Power Plex 88540
- Page 1 Form No. 3408-753 Rev A Power Plex™ 40V MAX Standard Battery Pack/Charger Model No. 88540—Serial No. 317000001 and Up Model No. 88541—Serial No. 317000001 and Up Model No. 88542—Serial No. 317000001 and Up *3408-753* A Register at www.Toro.com. Original Instructions (EN)
- Page 2 Warning • This battery pack/charger is for indoor use only. Register your product at www.Toro.com to ensure that Toro can notify you in the case of a safety or warranty product • Do not recharge non-rechargeable batteries.
- Page 3 • Do not disassemble the battery pack. • Do not heat the battery pack above 70°C (158°F) or incinerate it. • Replace the battery pack with a genuine Toro battery pack only; using another battery pack may cause a fire or explosion.
-
Page 4: Safety And Instructional Decals
Safety and Instructional Decals Safety decals and instructions are easily visible to the operator and are located near any area of potential danger. Replace any decal that is damaged or missing. Symbol Designation/Explanation Class II For indoor use only Before charging, read the instructions Current fuse (R3-360-1A-02) Current fuse (R3-360-3A-02,... - Page 5 decal136-2533 136-2533 1. Warning—read the Operator’s Manual; keep away from moving parts; keep all guards and covers in place; wear eye protection; do not operate in wet conditions. decal136-2534 136-2534 1. The battery does not 4. Stop—follow these come out of the box fully instructions before first charged.
-
Page 6: Product Overview
Setup Product Overview Mounting the Battery Charger Specifications (Optional) Battery Charger If desired, mount the battery charger securely on a wall using Specification R3-360-3A-02 R3-360-1A-02 R3-360-3A-03 the wall-mount key holes on the back of the charger. Type 36 V 3.6 36 V 0,65 36 V 3.0 A Battery... -
Page 7: Operation
Operation Charging the Battery Pack Important: The battery pack is not fully charged when you purchase it. Before using the tool for the first time, place the battery pack in the charger and charge it until the LED display indicates the battery pack is fully charged. -
Page 8: Installing The Battery Pack
Installing the Battery Pack Important: Operate the battery only in temperatures that are -15°C (5°F) to 65°C (149°F). 1. Make sure that the vents on the battery are clear of any dust and debris. 2. Line up the cavity in the battery pack with the tongue on the tool. -
Page 9: Maintenance
Maintenance Maintenance and servicing are not required under normal conditions. When you clean the surface of the equipment, wipe it off only with a dry cloth. Do not disassemble the equipment; if it is damaged, contact the supplier or manufacturer. Storage Important: Store the tool, battery pack, and battery charger only in temperatures that are between -20°C... -
Page 10: Troubleshooting
Troubleshooting Problem Possible Cause Corrective Action The flashlight does not turn on (battery 1. The battery pack is on the charger. 1. Remove the battery pack from the pack Model 88541 only). charger. 2. The battery pack is over or under the 2. - Page 11 Notes:...
- Page 12 Does not include the battery. 1 Year Battery Warranty for Residential Use. If you think your Toro Product contains a defect in materials or workmanship, if you have questions or problems, and before returning this product call toll free:...