Vacuum Cleaner user manual ✻ Before operating this unit, please read the instructions carefully. ✻ For indoor use only. imagine Thank you for purchasing a Samsung product. To receive a more complete service, please register your product at www.samsung.com/register the possibilities...
Safety Information SAFETY INFORMATION • Before operating the appliance, please read this manual thoroughly and retain it for your reference. WARNING • Because these following operating instructions cover various models, the characteristics of your vacuum cleaner may differ slightly from those described in this WARNING manual.
Safety Information IMPORTANT SAFEGUARDS Thank you for purchasing a Samsung vacuum cleaner. When using an electrical appliance, basic precautions should always be followed, including the following : PLEASE READ ALL WARNINGS AND INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER. WARNING : To reduce the risk of fire, electric shock, or injury.
Assembling the cleaner PRODUcT VIEW Handle Telescopic Pipe Smart Diverter Pop-Up Brush Height Adjustment Knob LED Head Light Furniture Guard • Do not plug in your vacuum cleaner until you are familiar with all instructions and operating procedures. CAUTION • Plastic film can be dangerous. To avoid danger of suffocation, keep away from WARNING babies and children.
Assembling the cleaner CARTON CONTENTS Ⓐ Ⓔ Empty carton. Find the parts shown above before disposing of packing materials. Ⓐ Vacuum cleaner body Handle Ⓑ Ⓒ Vacuum hose Ⓓ Telescopic pipe Pop-up brush Ⓔ Dusting brush(), Crevice tool(), Hose guide(2EA)() Ⓕ...
Page 7
Assembling the cleaner (1) Slide fully retracted telescopic pipe into the handle until you hear a click. (2) Slide fully retracted vacuum hose into the handle until you hear a click. (3) Slide fully retracted pop-up brush into the telescopic pipe until you hear a click. Stand the vacuum upright and place the base of the handle firmly into the groove at the top of the vacuum body.
Operating the cleaner POWER cORD 1. PULLING OUT The power cord is long enough to be drawn out for convenience. Do not pull the power cord beyond the red indicator. CAUTION 2. REWINDING Upon finishing cleaning, disconnect the plug from the electrical outlet and press the cord rewind button lightly with your toe.
Operating the cleaner SWITch OPERATION Power and Brush Roll on/off The Power on/off button is located on the top of vacuum body. Turn on vacuum by power button after plugging cord into electrical outlet. The brush roll on/off button turns the rotating floor brush on and off. Turn brush roll on to clean carpet and rugs.
Operating the cleaner ThERMAl PROTEcTOR This vacuum cleaner has a thermal protector which automatically trips to protect the vacuum cleaner from overheating. If a clog prevents the normal flow of air to the motor, the thermal protector turns the suction motor off automatically. This allows the suction motor to cool in order to prevent possible damage to the vacuum cleaner.
Operating the cleaner hEIGhT ADJUSTMENT 1. Place handle in upright position. 2. Turn height adjustment knob to desired setting. Lowest setting - For hard floors 4-step carpet setting - For various carpet heights Low carpet setting - For short pile carpets Intermediate carpet settings - For short and medium pile carpets High carpet setting...
Operating the cleaner 2. Dusting Brush Use dusting brush to dust furniture, blinds, books, lamps, shelves, and skirting boards. 3. Crevice Tool Use in tight, narrow spaces. 4. Pipe Adjust the length of the telescopic pipe by sliding the length control button located in the center of the telescopic pipe back and forth.
Maintenance To reduce the risk of electric shock, turn power switch off and disconnect polarized plug from electrical outlet before performing maintenance or troubleshooting checks. WARNING For maximum cleaning performance, check and clean, or replace all filters as suggested. EMPTY DUST bIN 1) To remove the dust bin from the vacuum body, push the dust bin release button.
Maintenance clEANING ThE PRE-MOTOR FIlTER The pre-motor filters (Foam Filter, Micro Filter) protect the motor from dirt particles. It is located in the filter case on the back of the dust bin. If the motor protection filters become dirty, remove and clean filters according to the following instructions. Check the pre-motor filters at least once a month and clean or replace as needed.
Maintenance clEANING ThE EXhAUST FIlTER 1) Remove dust bin as described in ‘Empty Dust Bin’ section pg.13. 2) Unlock and remove the filter cover. 3) Lift out exhaust filter. The exhaust filter is not washable. It must be cleaned in air or replaced when it becomes dirty.
Maintenance CHECKING RotAtING FLooR BRusH AND DRIvE BELt You should check your vacuum cleaners rotating floor brush and drive belt regularly for wear or damage. You should also clean the brush and brush ends of strings, hair, and carpet fibers. These can wrap around the brush and hamper its ability to effectively clean your carpet.
Maintenance SMART DIVERTER MAINTENANcE If you notice a decrease in suction, you should inspect and clean out the small hose inside the smart diverter according to the following instructions. 1. Unplug cleaner from electrical outlet. 2. Remove both vacuum hose and brush hose ends from smart diverter.
Maintenance DIRT SENSOR MAINTENANcE Although the dirt sensor feature in your vacuum cleaner is designed for years of trouble free use, the passage of dirt through the air passage system can coat the lens causing the dirt sensor light MIN to come on and stay on never switching to MAX.
Maintenance POP-UP bRUSh bRUSh MAINTENANcE The pop-up brush should be checked regularly for hair or debris wrapped around the brush roll and shaft pulley. Checking brush roll, shaft pulley and belt 1. Unplug cleaner from electrical outlet. 2. If a clog is present or debris is visible, turn the two fixer covers on the back of the pop-up brush to the unlock position to remove the brush cover and clear any obstructions.
Page 20
• Replace drive belt. -Pg. 16 This Vacuum cleaner is approved the following. Electromagnetic Compatibility Directive : 2004/108/EEC Low Voltage Directive : 2006/95/EC If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Country Customer Care Center...