Getting Ready To Install The Refrigerator - Samsung RSG5DUMH User Manual

setting up your side-by-side
refrigerator
GETTING READY TO INSTALL
THE REFRIGERATOR
Congratulations on the purchase of your Samsung
Side-By-Side Refrigerator. We hope you will enjoy
the many state-of-the-art features and effi ciencies
that this new appliance has to offer.
Selecting the best location for the
refrigerator
• Select a location with easy access to the water
supply.
• Select a location without direct exposure to
sunlight.
• Select a location with level (or nearly level) fl ooring.
• Select a location with enough space for the
refrigerator doors to open easily.
• Allow suffi cient space to the right, left, back and
top for air circulation.
- If your refrigerator is not level, the internal cooling
system may not work correctly.
- Refer to drawing and dimensions below for overall
space required for use.
• Please ensure that appliance can be moved freely
in the event of maintenance & service.
at least 6mm at least 6mm
When moving your refrigerator
To prevent fl oor damage be sure the front levelling
06_ setting up 06_ setting up
DA99-01745T-EN.indd 06 DA99-01745T-EN.indd 06
legs are in the up position (above the fl oor). Refer to
'Levelling the refrigerator' in the manual(at page 10).
To protect the fi nish of the fl ooring, place the
protection sheet such as packing carton under the
refrigerator.
When installing, servicing or cleaning behind
the refrigerator, be sure to pull the unit straight
CAUTION
out and push back in straight after fi nishing.
First things fi rst! Make sure that you can easily move
your refrigerator to its fi nal location by measuring
doorways (both width and height), thresholds,
ceilings, stairways, etc. The following chart details
the exact height and depth.
Dimension
(mm)
at least 6mm at least 6mm
• Do not install the refrigerator where the
temperature can drop below 10°C.
• Make sure you disconnect the water supply line
BEFORE removing the freezer door. See the next
section on "Separating the Water Line" to avoid
damage.
Leg Leg
Screw Driver Screw Driver
Model RSG5*
Without Door
Width
With Door
Only Cabinet
Depth Without Handle
With Handle
Without Door 1745
Height
With Door 1780
• Allow clearance to the right, left, back and
top when installing. This will help reduce
power consumption and keep your energy
bills lower.
RSG5*CRS
908 908
912 912
600 600
687 687
737 742
1745
1780
2011.6.27 3:28:49 PM 2011.6.27 3:28:49 PM