ABB i-bus
®
KNX
Commissioning
3
Commissioning
The IPR/S is parameterized using the application and the Engineering Tool Software (ETS).
The application can be found under Manufacturers/ABB/System components/Coupler.
For parameterization purposes, a PC or laptop with ETS and a connection to the KNX bus are required.
3.1
Overview
The IPR/S is parameterized using the Engineering Tool Software (latest ETS 5 version).
Some functions (Unicast) are parameterized via a separate tool (i-bus
3.2
Parameters
This chapter describes the parameters of the IP Router Secure using the parameter windows.
The parameter windows feature a dynamic structure so that further parameters or whole parameter
windows may be enabled depending on the parameterization and the function of the outputs.
The default values of the parameters are underlined, e.g.:
Options:
Yes
No
Tool).
®
IPR/S 3.5.1 | 2CDC502099D0211 Rev. A 19