Table of Contents
Advertisement
ABB i-bus
®
KNX
Device technology
2
Device technology
IPR/S 3.5.1
The IP Router Secure 3.5.1 is the interface between KNX installations and IP networks. It can be used as
a line coupler or area coupler and can utilize the local network (LAN) for exchange of telegrams between
lines/areas.
KNX devices can be programmed via the LAN using the ETS (five tunneling servers are available). The
device uses the KNXnet/IP protocol or the KNXnet/IP Security protocol from the KNX Association (routing
and tunneling).
Alternatively, the device can communicate via unicast.
The device is powered by 12 to 30 V DC or PoE (Power over Ethernet) to IEEE 802.3af class 1.
2.1
Technical data
Supply
Connections
Operating and display elements
Degree of protection
Protection class
Isolation category
Supply voltage U
s
Power loss
Current consumption, supply voltage
Rated voltage U
n
KNX current consumption
KNX
Operating voltage
LAN
Red LED and button
Green "On" LED
Yellow "LAN/Link" LED
Yellow "Telegram" LED
IP 20
II
Overvoltage category
Pollution degree
12...30 V DC (+10% / -15%)
or PoE (IEEE 802.3af class 1)
Maximum 1.8 W
Maximum 120 mA at 12 V
12 V DC
< 10 mA
Bus connection terminal
Plug-in terminal
RJ45 socket for 10/100BaseT,
IEEE 802.3 networks, AutoSensing
Assignment of the physical address
Ready indicator
Network connection indicator
KNX telegram traffic indicator
To EN 60 529
To EN 61 140
III to EN 60 664-1
2 to EN 60 664-1
IPR/S 3.5.1 | 2CDC502099D0211 Rev. A 11
Advertisement
Table of Contents
