NEO:6 Mode
You can play back 2 channel sound over 6.1 channels of when enjoying music or a movie.
REMOTE CONTROL
1
To Exit Setup Mode
•
Wait for about 5 seconds.
•
NEO:6 Mode can be used with DTS and Dolby
Digital multi channel signals.
Pro Logic works only for PCM audio signals with
•
sampling frequency of 32KHz, 44KHz or 48KHz.
31
Press NEO:6 MODE button.
•
Each time you press this button, MUSIC
CINEMA will be selected in turn.
NEO : 6 Mode
This mode decodes 2 channel signals to high precision digital matrix
decoder.
DTS NEO:6 decoder discretes 2 channel sound to Discrete 6.1
channel sound.
MUSIC : NEO:6 MUSIC Mode is optimized for music playback
•
•
CINEMA : NEO:6 CINEMA Mode is optimized for movie playback.
MAIN UNIT
1
Press SURROUND button briefly to select "NEO:6" Mode.
•
Each time you press this button, DPL ll x
NEO:6
selected in turn.
2
Press SELECT(
,
) button.
Each time you press this button, MUSIC
CINEMA will be selected in turn.
•
To Set Sound Image of Center Speaker
If TV (or screen) is installed high, you can feel the balance of sound and image by
raising the sound image of Center Speaker.
1
Press SETUP button.
"SETUP MODE" appears on the display and enters into Setup Mode.
•
2
Press INPUT button 10 times.
"NEO:6 MODE" appears on the display.
•
3
Press SURROUND button.
"CEN-IMG" appears on the display.
•
4
Press SELECT(
) button to set the sound image you want.
,
You can set the sound image from 0 to 5.
•
To Exit Setup Mode
Wait for about 5 seconds or turn VOLUME CONTROL of the main unit. 'SETUP MODE OFF' appears
•
on the display and exits Setup Mode.
You can use this function to set the sound image of Center Speaker
•
only via the main unit.
GB
SFE
STEREO will be
32