Deleting The Device Codes Of An Individual Device (Delete Dev); Deleting All Button Codes (Delete All); The Macro Function (Macro); Programming A Macro - Silvercrest SFB 10.1 C3 User Manual And Service Information

Deleting the device codes of an individual device (DELETE
DEV)
This function allows you to delete all learned codes for a selected device.
1. Press and hold the
2. Press
3. Press
4. The display reads "SELECT DEV".
5. Press the device button of the device for which you want to delete
the code. The display reads "SURE DELET".
6. Press
"SELECT DEV".
7. Repeat steps 5 and 6 for each device for which you wish to delete
the codes.
Press to go back one menu level. To return to the start window,
press one of the device buttons.

Deleting all button codes (DELETE ALL)

This function allows you to delete all learned codes for all devices at
once.
1. Press and hold the
2. Press
3. Press
The display reads "SURE DELET".
4. Press
"DELETE ALL".
Press to go back one menu level. To return to the start window,
press one of the device buttons.

The macro function (MACRO)

The macro function lets you save up to 16 commands for a device that
will be sent in sequence when pressing one single button. Please
remember that one command is used for device selection, leaving 15
commands free to be assigned.
Example: Power on TV > Select channel 11 > Display Teletext > Open
Teletext page 222.

Programming a macro

1. Press and hold the
2. Press
, select "LEARNING" and press
, select "DELETE DEV" and press
to confirm. The display reads "DELETED" and then again
, select "LEARNING" and press
, select "DELETE ALL" and press
to confirm. The display reads "DELETED" and then again
, select "MACRO" and press
button for 3 seconds.
button for 3 seconds.
button for 3 seconds.
SilverCrest SFB 10.1 C3
to confirm.
to confirm.
to confirm.
to confirm.
to confirm.
English - 61