Page 5
Attention! In order to avoid eye injuries do not look at the diode with optical devices. Illumination button...
Page 6
The time of day and date will, however, be lost in either case.
Page 8
The mentioned button allocation is not compulsory. You can, for example, also save the code for the video recorder on the TV slot.
Page 10
Press the FAV/EPG button to access your previously programmed favourite station.
Page 11
• Setting the time of day, date, display contrast, background illumination, volume, lock function as well as system reset.
Page 13
Subsequently the menu will close automatically.
Page 14
Subsequently the menu will close automatically...
Page 17
Setting the global volume/mute switching 1. Hold the S button down for a little longer than 3 seconds. The notice „CODE SETUP“ appears. 2. With the button select “SYSTEM SETUP” and confirm with the OK button 3. With the button select “VOL/MUTE SETUP”...
1. For this purpose select in the VOL/MUTE SETUP with the button the function MODE VOL SET and confirm with the OK button 2. Now press the device button for the device that is to be excluded from the global volume control. The LCD display shows „SUCCESS“...
Page 19
4. With the button now select between „LOCK“ (Block) or „UNLOCK“ (Unblock). 5. With the OK button you save the setting. In the LCD display „LOCK SETUP“ then appears again. With z ” programmed sleep-timer the LCD display shows “ on the right next to the time.
Page 20
If you now press the S button “SL” is shown in the dis- play below on the left. 9. With programmed event timer the LCD display shows the timer symbol „ ” on the right next to the time.
Page 21
The memory can accommodate 150 button commands.
Page 23
5. By default the Macro commands are sent in intervals of 1 every second. Since many devices react sluggishly it is possible that the sequence of the Macro commands are sent too quickly to the device. Then you have the option of programming, before a button command, a pause of between 5 - 21 seconds.
Page 25
However, this does not apply to the following devices: “AMP”, “DVD”, “ASAT”, and “DSAT” since it can be assumed that these devices are equipped with their own volume control...
Page 26
If you press the S button the date is superimposed for 10 seconds in the LCD display below and on the right. Press the illumination button to switch the display and button illuminations on and/or off.
Page 83
Tel.: 0770 930739 E-Mail: kompernass@lidl.se IAN 64327 Tel.: 010309 3582 E-Mail: kompernass@lidl.fi IAN 64327...
Page 85
H O M E T E C H Herstellerverzeichnis mit Gerätecodeliste Register van producenten met lijst van apparaatcodes Index des fabricants avec liste des codes appareil Registro produttori con elenco codici apparecchi Índice de fabricantes con lista de códigos de aparatos Fabricantes Diretório com lista de códigos de dispositivo Manufacturer List with Device Code List...
Need help?
Do you have a question about the SFB 10.1 A1 and is the answer not in the manual?
Questions and answers