Drive Status Display - Bosch Servodyn-D Manual

Diagnoses
6–2
6.2

Drive status display

Displaying cyclic data
Drive status in plain text as per
S-0-0095.
Display of max. 4 parameters.
For configuration, cf. page 6–3.
For displaying parameters in sepa-
rate windows, refer to section 6.5
page 6–6.
Display of digital outputs OUTx
(P-0-2003).
For configuration, cf. P-0-2002 and
section 4.2.8, page 4–8.
Also refer to section 6.3.
The display will show dynamic information on
D drive status: diagnostics message in plain text
D values of max. 4 parameters
D binary status of parameter P-0-2003
D status of "Drive ON", "Drive enable", and "Drive start"
D current operation mode
D Changes in "diagnostics class 1" to "diagnostics class 3" parameters
(S-0-0011 to S-0-0013)
L
Select the menu sequence:
D DIAGNOSES " MODULE STATUS DISPLAY, or
D click on the
select "Module Status Display".
For updating frequency of the data, refer to page 6–3.
command button in the DSS basic image and then
1070 066 037-101 (00.02) GB