Advertisement
4.5.3 Enabling the remote notification
This function is disabled in the default factory-shipped settings. The remote notification uses
the standard Windows® SNMP service. If you enable the SNMP service, the remote
notification is enabled.
When you use the remote notification, follow the procedure below to enable the SNMP
service:
(1) Starting the "SNMP Service Properties" window
1. If you are not logged on to the computer as an administrator, log on to the computer as
an administrator.
2. Follow the procedure below to start the Services window.
• Click Start and then Control Panel.
• Double-click System and Security > Administrative Tools > Services.
• If you see the "User Account Control" window, click Yes.
3. Double-click SNMP Service to start the "SNMP Service Properties" window.
4. CHECKING THE HARDWARE STATUS
4-23
Advertisement
