Advertisement
3. Drive condition
Shows the current status of the drives. In the following areas, the drive conditions of
drive bay1 and 2 are displayed.
Table 4-4 Drive Condition and Displayed Information
No.
Drive condition
If SMART
1
monitoring
is enabled
Normal
If SMART
2
monitoring
is disabled
Failure anticipation by
3
SMART
If SMART
4
monitoring
Drive
is enabled
usage
If SMART
excess
5
monitoring
is disabled
The drive is
6
offline.
The drive
7
Error
is being
rebuilt.
8
Unknown
9
Not mounted
Nos. 6 through 8: These descriptions apply to D Model only.
No. 9: This description does not apply to D Model.
When failure of a drive is anticipated by SMART, the drive may experience
hardware failure in near future. We recommend you to back up the data and
replace the drive.
4. Drive used hours
The drive used hours (cumulative hours up to date) is displayed. The value of the
cumulative hours is updated every hour between 0 and 100 hours and every ten hours
after that. The range of the cumulative hours that can be displayed is between 0 and
99990 (hours). If the drive usage monitoring is disabled, the drive used hours cannot
be displayed.
4. CHECKING THE HARDWARE STATUS
Icon
Healthy.
SMART is not available.
A failure may be imminent.
Used hours exceeded prescribed value.
Used hours exceeded prescribed value.
OFFLINE.
REBUILD.
Unknown.
Not Connected.
NOTICE
4-9
Information
Advertisement
