To Deactivate The Isg System; Isg System Malfunction - Hyundai i20 Owner's Manual

Hide thumbs Also See for i20:
Table of Contents

Advertisement

To deactivate the ISG system

• Press the ISG OFF button to deac-
tivate the ISG system. Then, the
ISG OFF button indicator illumi-
nates, and the message "Auto Stop
System Off" appears on the LCD
display.
• Press the ISG OFF button again to
reactivate the ISG system. Then,
the ISG OFF button indicator turns
OFF .

ISG system malfunction

The ISG system may not operate:
When there is a malfunction with the
ISG sensors or the ISG system.
The followings occur, when there is
a malfunction with the ISG system:
• The auto stop indicator (
blink in yellow on the instrument
cluster.
• The light on the ISG OFF button
will illuminate.
i
Information
• When you cannot turn OFF the ISG
OFF button indicator by pressing
the ISG OFF button, or when the
malfunction with the ISG system
persists, we recommend that you
contact an authorized HYUNDAI
dealer.
) will
• You can turn off the ISG OFF but-
ton indicator by driving over 80
km/h (50 mph) for up to 2 hours
with the fan speed below the 2nd
position. If the ISG OFF button
indicator remains ON, we recom-
mend that you contact an author-
ized HYUNDAI dealer.
WARNING
When the engine is in auto stop
mode, the engine may restart.
Before leaving the vehicle or
checking the engine compart-
ment, stop the engine by plac-
ing the ignition switch to the
LOCK/OFF position or remov-
ing the ignition key.
5
5-59

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the i20 and is the answer not in the manual?

Questions and answers

Csergő Sándor
April 8, 2025

A RÁDIO MINDEN CSATORNÁN RECSEG.PEDIG MÁR AZ ANNTENÁT IS KICSERÉLTEM.MIT TEGYEK?

1 comments:
Mr. Anderson
April 9, 2025

If the radio in a Hyundai i20 is crackling on all channels after replacing the antenna, you should:

1. Open the trim around the radio to access it.
2. Check if the antenna cable is properly plugged in.
3. Determine if the antenna is amplified.
4. If it is amplified, verify it is receiving power and ground.
5. Inspect the antenna itself to ensure it is present and properly installed.
6. Check the base of the antenna for any built-in electronic circuits that may be faulty.

This answer is automatically generated

This manual is also suitable for:

I20 5-doorI20 3-doorI20 crossI20 2018

Table of Contents

Save PDF