Setup; Display; Sound - Hyundai i20 Owner's Manual

Hide thumbs Also See for i20:
Table of Contents

Advertisement

SETUP

Display

You can change the settings related
to the system display.
1. On the control panel, press the
[SETUP/CLOCK] button.
2. Turn the [TUNE] knob to select
Display, and then press the knob.
• Song
information
Display): Select information to dis-
play when playing MP3 files.
• Mode popup: Set to display mode
selection
window
when
[RADIO] or [MEDIA] button is
pressed on the control panel.
• Scroll text (Text Scroll) (if
equipped): Set to scroll text when
information text is too long to dis-
play all on the screen.
NOTICE
The
text
scroll
equipped) is only available in the
following situation:
• When displaying titles in the
USB/iPod/Bluetooth
modes
• When displaying items on the
(Media
Favourites/Call history/Contacts
lists
• When displaying device names
on the Paired devices/Delete
the
devices/Connection priority lists
in the phone settings.

Sound

You can change the settings related
function
(if
to sounds, such as location where
sound will be concentrated and the
output level for each range.
1. On the control panel, press the
audio
[SETUP/CLOCK] button.
2. Turn the [TUNE] knob to select
Sound, and then press the knob.
• Position: Select a location where
sound will be concentrated in the
vehicle. Select Fade (Fader) or
Balance, turn the [TUNE] knob to
select the desired position, and
then press the knob. To set sound
to be centred in the vehicle, select
Default.
• Equaliser (Tone): Adjust the out-
put level for each sound tone
mode.
• Speed dependent vol.: Set the
volume to be adjusted automati-
cally according to your driving
speed.
4
4-37

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the i20 and is the answer not in the manual?

Questions and answers

Csergő Sándor
April 8, 2025

A RÁDIO MINDEN CSATORNÁN RECSEG.PEDIG MÁR AZ ANNTENÁT IS KICSERÉLTEM.MIT TEGYEK?

1 comments:
Mr. Anderson
April 9, 2025

If the radio in a Hyundai i20 is crackling on all channels after replacing the antenna, you should:

1. Open the trim around the radio to access it.
2. Check if the antenna cable is properly plugged in.
3. Determine if the antenna is amplified.
4. If it is amplified, verify it is receiving power and ground.
5. Inspect the antenna itself to ensure it is present and properly installed.
6. Check the base of the antenna for any built-in electronic circuits that may be faulty.

This answer is automatically generated

This manual is also suitable for:

I20 5-doorI20 3-doorI20 crossI20 2018

Table of Contents

Save PDF