Mitsubishi Electric 800 Series Instruction Manual page 24

Rating
 FR-F860-00680 or higher
Model FR-F860-[ ]
Inverter capacity (kW)
Applicable motor capacity (kW)

Rated capacity (kVA)

Rated current (A)

Overload current rating

Rated voltage

Rated input
AC voltage/frequency
Permissible AC voltage fluctuation
Permissible frequency fluctuation
Rated input current (A)

Power supply capacity (kVA)

Protective structure (IEC 60529)
Cooling system
Approx. mass (kg)

The applicable motor capacity indicated is the maximum capacity applicable for use of the 4-pole standard motor.

The rated output capacity indicated assumes that the output voltage is 575 V.

When an operation is performed with the carrier frequency set to 3 kHz or more, and the inverter output current reaches the value indicated in the parenthesis, the
carries frequency is automatically lowered. The motor noise becomes louder accordingly.

The % value of the overload current rating indicated is the ratio of the overload current to the inverter's rated output current. For repeated duty, allow time for the inverter
and motor to return to or below the temperatures under 100% load.

The maximum output voltage does not exceed the power supply voltage. The maximum output voltage can be changed within the setting range. However, the maximum
point of the voltage waveform at the inverter output side is the power supply voltage multiplied by about

The rated input current indicates a value at a rated output voltage. The impedance at the power supply side (including those of the input reactor and cables) affects the
rated input current.

The power supply capacity is the value when at the rated output current. It varies by the impedance at the power supply side (including those of the input reactor and
cables).
24
SPECIFICATIONS
00680 01080
45 75
SLD 45 75
LD 45 75
SLD 68 108
LD 62 99
SLD 68 (57.8) 108 (91.8)
LD 62 (52.7) 99 (84.1)
SLD 110% 60 s, 120% 3 s (inverse-time characteristics) at surrounding air temperature of 40°C
120% 60 s, 150% 3 s
(inverse-time characteristics) at
LD
surrounding air temperature of
40°C
Three-phase 525 to 600 V
Three-phase 525 to 600 V 60 Hz
472 to 660 V 60 Hz
±5%
SLD 87 108
LD 79 99
SLD 86.8 107.6
LD 79.1 98.6
Open type (IP00)
Forced air cooling
36 41
01440 01670 02430
90 110 132
110 110 185
90 110 150
144 167 242
131 152 221
144 (122) 167 (141) 243 (206)
131 (122) 152 (129) 221 (187)
120% 60 s, 150% 3 s (inverse-time characteristics) at surrounding air temperature of 50°C
144 167 243
131 152 221
143 166 242
130 151 220
52 52 55
02890 03360
160 220
220 260
185 220
288 335
254 303
289 (245) 336 (285)
255 (216) 304 (258)
289 336
255 304
288 335
254 303
112 115
.
04420
250
335
300
441
401
442 (375)
402 (341)
442
402
440
400
153