Loading Cpu Link Parameters In From File (For S10V Controllers Only); Figure 4-25 [[Online] Pcs Edition] Window And Clicking The Load Button; Figure 4-26 [Open] Window - Hitachi LQE550 User Manual

4.8.6 Loading CPU link parameters in from file (for S10V controllers only)

Function: Loads the contents of a selected CPU link parameter file into the [[Online] PCs edition]
window, thus enabling you to write them to the S10V controller. (This feature is
supported only by Ver-Rev 01-02 or later of the S10V CPU link system and can be
used only in online mode.)
Operation: The procedure used is described below.
① In the [[Online] PCs edition] window displayed as shown below, click the
Figure 4-25 [[Online] PCs edition] Window and Clicking the
The [Open] window as shown below will then appear.

Figure 4-26 [Open] Window

4-25
4 OPERATION
Load button.
Load Button