Startup Procedure; Figure 4-1 Startup Procedure - Hitachi LQE550 User Manual

4 OPERATION

4.1 Startup Procedure

Power off
Mount and wire a CPU link module
(See Chapter 3.)
Setting CPU link module switches
(See Section 4.2.)
Setting CPU/LPU module switches
(See Section 4.3.)
Connect personal computer
(See Section 4.4.)
Switching ON
(See Section 4.5.)
Setting module information
(See Section 4.6.)
Register module information
(See Section 4.7.)
Link module in operation

Figure 4-1 Startup Procedure

4-2
Use a personal computer on which the
system (see "1.4 System Software
Spacifications") is installed. For the
installation procedure, see "4.8 Installing
and Starting Up the System."