Returning The 8080 To The Factory Default Condition - Zoom 8080 Operation Manual

Returning the 8080 to the factory default condition

You can return all settings of the 8080 including all USER group patches to the factory default condition. This is
useful for example if you have inadvertently erased the contents of a USER group patch.
Beacon
COMP EFF1 DIST
STORE GROUP
(EXECUTE) COMPARE
ADVANCED GUITAR EFFECTS PROCESSOR
CONTROL
PEDAL
1
Turn the 8080 off.
(Turn the amplifier
volume to minimum.)
2 Turn the 8080 on while
holding the
STORE/EXECUTE key
depressed.
3 Press the
STORE/EXECUTE key
more.
4
To carry out "ALL-
INITIALIZE", press the
STORE/EXECUTE key
If you wish to cancel the initialize process, press the EDIT/EXIT key instead of pressing the STORE/EXECUTE key a second
NO
time.
44
Display
FINE TUNE
CONTROL
SWITCH
INDICATOR
MAX
MIN MAX 1 2 MIN MAX
3 4
1/2 INCREASE
MIN MAX MIN MAX
EQ EFF2 EFF3 DLY REV TOTAL
CONTROL
EDIT UTILITY
– TYPE + MIN
EXIT PAGE
BLINK
(DLY:TAP)
PRESENCE OUTPUT
DECREASE
–(TAP/HOLD)
USER
FUNCTION
BANK
POWER
OFF
POWER
ON
The 8080 goes into standby for
"ALL-INITIALIZE".
once
All settings of the 8080 are reset to
the factory default condition.
.
CONTROL
PEDAL
1, 3, 4
SWITCH
A
STORE/EXECUTE key
STORE
(EXECUTE)
> ALL INITIALIZE <
ENTER EXECUTE | | EXIT
ALL INITIALIZE
PLEASE EXECUTE Key
01 8080LEAD LVL=100
AMP ¡VOL ™OFF ßHLD