Table of Contents
Advertisement
How to Connect /disconnect the quick connector and tubes
1. Remove U-shaped lock.
3. If the end of the tubes have burrs, they can be removed by
using a pencil sharpener as shown below. Do not create a large
taper on the end of the tube because it can cause a leak.
4. Push tubing in until fully seated.
IMPORTANT: Do NOT Return Dispenser To Store.
If you have a question or problem, please contact 1-844-494-4757 for assistance.
Model # 8LIECH-SCSSFP5W: Page 17
2. Press collet and pull
tubing out.
5. Reinstall U-shaped lock.
Hide quick links:
Advertisement
Table of Contents
