Table of Contents
Advertisement
Front ports
USB 3.0
USB - C
HDMI 2.0
USB Touch
Sensors
Ambient light sensor
Proximity sensor
Ambient factors
Ambient temperature during use
Ambient temperature when stored
Humidity during use (no condensation)
Humidity when stored (no condensation)
General information
Voltage
Nominal power consumption (without modules)
Energy consumption in ECO mode
Energy consumption in on mode
Energy consumption in standby mode
Gross weight
www.prowise.com
2
1
1
1
1
1
0°C - 38°C
32 - 100°F
-20°C - 60°C
-4 - 140°F
10% - 90%
10% - 90%
~ 100-240 V (50/60Hz)
140W
72W
120W
≤ 0,5 Watt
55 kg
121.2 lbs
15 / 44
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the PW.1.17055.0001 and is the answer not in the manual?
Questions and answers
Hello, We are having some trouble with the lift of one of our ProWise TS screens. The screen is installed on a wall-mounted lift system with a foot pedal. But when we try to change the height of the screen, we only hear a beep but the screen doesn't move. We have tried to disconnect the power to the lift, but this doesn't seem possible since the cables just go into the wall and there is no apparent switch or plug we can unplug. So a reset of the lift is not possible as far as we can see. Is there any other way to reset the lift system without disconnecting the power to the lift?