Switching Off After Activating; Software Version - Miele PG 8581 Operating Instructions Manual

Switching off af-
ter activating
Setting the standby
duration
Open the menu as follows:

 button
Additional settings

 Switch off after
Switch off after
Yes
No
Yes
-
The Auto-Off function is activated. A duration must be set after
which automatic switch-off should occur.
No
-
The Auto-Off function is deactivated.
Select an option using the  and  arrow buttons.

Press OK to save the setting.

Yes
If the option has been selected, the standby duration after which
automatic switch-off should occur must be set next.
The standby duration can be adjusted in 5 minute increments. The
possible range is shown in the bottom line of the display.
Use the  (higher) and  (lower) arrow buttons to set the standby

duration.
Press OK to save the setting.


Software version

You can use this menu to view the software versions of individual ele-
ments, e.g. when contacting Miele Service.
For more information, see "Service."
Switch off after
60 Min
(5 - 120 Min )
Additional settings
87