Sealey VS8623 Instructions Manual

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT
CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL
INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Please register your product with Sealey by completing the registration form on-line at www.sealey.co.uk
Navigate to Register Product. By registering your product you can take advantage of Sealey product and technical updates via email.
1. SAFETY

WARNING! Wear appropriate Personal Protective Equipment. A full range of Personal Protective Equipment is available from your Sealey dealer.

WARNING! Ensure that Health & Safety, Local Authority Regulations and general workshop practice Regulations are adhered to when using
tools.
 DO NOT use tools if damaged.
 Maintain tools to ensure that they are in an adequate condition for safe use and optimum performance.
 Ensure that a vehicle that has been raised by a jack is adequately supported. Use axle stands.
 Wear suitable clothing to avoid snagging. DO NOT wear jewellery. Tie back long hair.

Account for all tools, parts and components being used. DO NOT leave these in or near the engine. Return tools to suitable storage after
use.
 When not in use, store in a safe, dry childproof place.
 Keep children and unauthorised persons away from the work area.
s IMPORTANT! These instructions are provided as a guide only. Always refer to the vehicle manufacturer's service instructions
or a proprietary manual to establish the correct procedure and data.

WARNING! The warnings, cautions and instructions in this manual cannot cover all possible conditions and situations. The Operator / user must
apply caution and common sense (good practical sense).
2. INTRODUCTION
Alfa Romeo, Fiat and Lancia oil service and oil degradation reset tool. Compatible with the latest Fault Tolerant CAN vehicles. Designed to
extinguish the oil service light and to show if there is a fault on the CAN bus which is a common problem with some vehicles.
© Jack Sealey Limited
INSTRUCTIONS FOR:
SERVICE RESET TOOL WITH OIL
DEGRADATION FUNCTION - FIAT GROUP
MODEL No: VS8623
TECHNICAL HELPLINE NO. 01284 757505
Original Language Version
VS8623 Issue: 2(I) - 21/11/14