AC Infinity AIRTAP Series User Manual

Hide thumbs Also See for AIRTAP Series:

User manual (40 pages)

User manual

Table Of Contents

Quick Links

AIRTAP SERIES

USER MANUAL

Table of Contents

Need help?

Do you have a question about the AIRTAP Series and is the answer not in the manual?

Questions and answers

dennis Hammer

January 27, 2025

I have an airdrop that worked fine last year. The temperature reading went over 100 when the heating system went on. This year the temperature reading does not change? could this be a malfunction in the airdrop?

1 comments:

Mr. Anderson

February 10, 2025

The AC Infinity AIRTAP Series allows switching between Fahrenheit and Celsius by holding the up and down buttons simultaneously. If the temperature reading does not change, ensure the correct procedure is followed. If the issue persists, it may indicate a malfunction, and contacting customer support is recommended.

This answer is automatically generated

Summary of Contents for AC Infinity AIRTAP Series

Page 1 AIRTAP SERIES REGISTER BOOSTER FAN SYSTEM USER MANUAL...
Page 3 WELCOME Thank you for choosing AC Infinity. We are committed to product quality and friendly customer service. If you have any questions or suggestions, please don’t hesitate to contact us. Visit www. acinfinity.com and click contact for our contact information.
Page 4 MANUAL CODE AT2010X1 PRODUCT MODEL UPC-A AIRTAP T4, Bronze 4” x 10” AC-RBF4-B 819137020238 AIRTAP T4, White 4” x 10” AC-RBF4-W 819137020245 AIRTAP T4, Bronze 4” x 12” AC-RBF42-B 819137020641 AIRTAP T4, White 4” x 12” AC-RBF42-W 819137020658 AIRTAP T6, Bronze 6” x 10” AC-RBF6-B 819137020603 AIRTAP T6, White 6”...
Page 5: Table Of Contents
MANUAL INDEX Manual Index ................. Page 5 Key Features ................. Page 6 Product Contents ................Page 7 Installation ..................Page 8 Programming ................. Page 12 ....................Page 20 Other AC Infinity Products ............. Page 21 Warranty ..................Page 22...
Page 6: Key Features
KEY FEATURES ALUMINIUM FRAME SMART CONTROLLER DUAL BALL BEARINGS Features an aluminum frame Enables temperature Enables unit to be mounted in with CNC-machined corners monitoring, hot and cold any direction. Motor contains and a white or bronze finish to temperature triggers, and dual-ball bearings with a give cabinets a clean look.
Page 7: Product Contents
PRODUCT CONTENTS POWER ADAPTER (x1) SCREW SET (x2) REGISTER FAN (x1)
Page 8: Installation
INSTALLATION STEP 1 Measure your register vent to make sure this model will fit. Standard sizes come in 4x10”, 4x12”, 6x10”, 6x12” etc. STEP 2 Remove your register grille. You may need to use a Philips screwdriver to remove the mounting screws.
Page 9 INSTALLATION STEP 3 Plug the power adapter into an outlet. This can be next to your register or inside your register. STEP 3.5 If you are powering the register fan with an external outlet, run the power cord towards the groove on the side of the register fan.
Page 10 INSTALLATION STEP 4 Plug the power adapter’s cord into the power receptacle of the register fan unit. STEP 5 Check the LCD display to see if it is lit and shows a number reading.
Page 11 INSTALLATION STEP 6 Position the register fan to be mounted. If the outlet is external, make sure the cord runs through the gap between the wall and mounting plate. STEP 7 Drill your existing screws into the mounting holes to secure the register fan. If needed, use the screws included with your register fan.
Page 12: Programming
PROGRAMMING 1. MODE BUTTON 2. UP / DOWN BUTTON 3. TEMPERATURE DISPLAY Cycles through the unit’s Changes the temperature Displays the current temper- modes: temperature display, setting in the cooling trigger, ature that is measured by the cooling trigger, heat trigger, the heating trigger, and the probe.
Page 13 PROGRAMMING IMPORTANT NOTES – PLEASE READ This product is used to boost your existing AC or heater's airflow. It allows you to set temperature points where the fans will turn on if the airflow's temperature falls below or rises above the cooling or heating trigger's setting, respectively.
Page 14 PROGRAMMING CONTROLLER LOCK To lock the controller, go to the temperature display mode and then hold the mode button for three or more seconds. While the display is locked, you will not be able to switch modes or adjust settings, but they will be working in the background.
Page 15 PROGRAMMING COOLING TRIGGER Use this mode to set the temperature trigger for your air conditioner. Please note you are NOT setting your desired temperature. In this mode, the fans will run if the probe temperature meets or falls below the trigger’s cold temperature setting. It will not run if the probe temperature is above the trigger’s cold temperature setting.
Page 16 PROGRAMMING Your air conditioner Cold air blows through the turns on. duct and into your room. When the probe detects the airflow The fans will pull cold air from temperature has fallen below your Cooling your duct to boost your AC Trigger, it will activate the fans.
Page 17 PROGRAMMING HEATING TRIGGER Use this mode to set the temperature trigger for your heater. Please note you are NOT setting your desired temperature. In this mode, the fans will run if the probe temperature meets or rises above the trigger’s hot temperature setting. It will not run if the probe temperature is below the trigger’s hot temperature setting.
Page 18 PROGRAMMING Your central heating Heated air blows through the system turns on. duct and into your room. When the probe detects the airflow The fans will pull heated air temperature has risen above your Heating from your duct to boost your Trigger, it will activate the fans.
Page 19 PROGRAMMING FAN SPEED This mode allows you to set a maximum fan speed in which they will actively run until you leave it. Pressing up or down will change the fan speed and determine the level of airflow boosting. Holding the MODE button will set the fan speed to 0.
Page 20: Faq
AIRTAP FAQ Will I be able to mount this fan on my ceiling? For safety reasons, we do not recommend mounting the AIRTAP on your ceiling. Will I be able to mount this fan on a baseboard style register? No. Because of the tilted design, the AIRTAP will not have the clearance to be properly mounted. My register is bigger than my fan's rear insert.
Page 21: Other Ac Infinity Products
AC INFINITY PRODUCTS RACK FANS The CLOUDPLATE series rack fan system is designed for quietly cooling a wide range of audio, video, home theater, network, and IT equipments racks. The model features a thermal controller with intelligent programming that will automatically adjust the fan speeds in response to changing temperatures.
Page 22: Warranty
WARRANTY This warranty program is our commitment to you, the product sold by AC Infinity will be free from defects in manufacturing for a period of two years from the date of purchase. If a product is found to have a defect in material or workmanship, we will take the appropriate actions defined in this warranty to resolve any issues.
Page 23 No part of the materials including graphics or logos available in this booklet may be copied, photocopied, reproduced, translated or reduced to any electronic medium or machine readable form, in whole or in part, without specific permission from AC Infinity Inc.

This manual is also suitable for:

Airtap t4 Airtap t6 Ac-rbf4-b Ac-rbf4-w Ac-rbf42-b Ac-rbf42-w ... Show all