Giving Preference To The Tape Length Over The Title Se; Quence (Cd Edit) - Kenwood XD Series Instruction Manual

Giving preference to the tape length over the title sequence
(CD EDIT)
When the tape recording time is specified, recording is ex-
ecuted w ith changing the title sequence so that no title
w ill be interrupted w hen the tape direction is changed at
the end of one side.
When equalizer or another effect is applied to the
sound, the sound w ith the applied effect can be re-
corded.
Recording preparations are required. º
1
Press the DUBBING key.
2
Select "CD EDIT" and press the SET key.
3
Select a disc and press the SET key.
4
Set the tape length (recording time) and press the ENTER key.
5
Start edit recording.
Press the CD PGM key tw ice to cancel CD EDIT.
Depending on the combination of conditions from CD contents (number of titles and length of the titles) and tape recording time, interruption
Note Note of a title may not be avoidable. In such a case, the respective title w ill not be recorded.
Downloaded from: http://www.usersmanualguide.com/
1 2
M ULTI
CON TROL
SET
1 2
M ULTI
CON TROL
SET
1 2
M ULTI
CON TROL
EN TER
Press the ENTER Key.
EN TER
p
º º º
º
(Steps 1 to 3) (For the reverse mode, select " p" (tw o-w ay recording).)
CD ONE TRACK RECORD (Only during CD playback)
CD RECORD
CD EDIT
CD PGM RECORD
TAPE DUBBING
(Only w hen the selected input is TAPE and tapes are
present in both decks A and B)
÷ Even if the disc has already been selected, select the disc again.
÷ The tape and CD stop automatically w hen recording has completed.
÷ Press the stop ( 7 ) key to stop recording in the middle.
÷ If you commit an error in the time entry, restart the procedure from step
1 .
Convenient CD recording
C D E
D s I C 2
C - 6 0
Automatic editing of tape sides A and B
E N T E R
E D I T A T 0 1
1 2 3
47
XD-SERIES (En)
D I T