Advertisement
(c) You can see if FX/FX-DUO is connected by the task tray icon.
FX
FX-DUO
(d) If still not have troubles, please restart the SX-2000WG+ (Disconnect and connect the
power cable). Please wait 2 minutes to configurate wireless connection. Then follow to
section 6 to reconnect.
(e) If still not work correctly, reboot PC
(4) How to re-setup USB GW-US54GXS
In order to re-setup GW-US54GXS, please uninstall the driver and install it again in
accordance with following instruction.
(a) Confirm GW-US54GXS is plugged on PC.
(b) Run "Start"→"All Programs"→"bRoad Lanner Wave"→" Uninstall GW-US54GXS Utility".
(c) Select "OK", then uninstall start.
All Rights Reserved. Copyright © 2008, Hitachi Software Engineering Co., Ltd.
Not connected
not connected
connected
connected
24
Advertisement
