Download Print this page
Sealey RE97XS05 Quick Start Manual

Sealey RE97XS05 Quick Start Manual

Shorty push ram

Advertisement

Quick Links

RE97XS05
RE97XS20
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of product. WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required
for any claim. INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
Sole UK Distributor,
01284 757500
Sealey Group,
Bury St. Edmunds, Suffolk.
SHORTY PUSH RAM
Models:
RE97XS05, RE97XS10
RE97XS05, RE97XS10
RE97XS20, RE97XS30
RE97XS20, RE97XS30
RE97XS10
RE97XS30
01284 703534
www.sealey.co.uk
sales@sealey.co.uk
e-mail
Web
RE97XS05, RE97XS10, RE97XS20, RE97XS30 - 1 - 091104
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according
to these instructions and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE
PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
Only fully trained and qualified persons should use this equipment. These instructions are not a
substitute for user receiving full supervised training by a qualified person. It is important the user understands
the applications, limitations and potential hazards of the product.
1.
SAFETY INSTRUCTIONS
WARNING! Ensure Health & Safety, local authority and general workshop practice regulations are adhered
p
p
to when using this equipment.
3 Familiarise yourself with product application and limitations, as well as the specific hazards peculiar to the kit.
WARNING! Disconnect the ram from the hydraulic pump before servicing or performing any maintenance
p
p
on the unit.
3 Maintain kit in good order. Replace/repair with genuine parts only. Unauthorised parts may be dangerous and
will invalidate the warranty.
3 Keep the ram clean for best and safest performance.
WARNING! Ensure you know how much load you are pushing. Never exceed the maximum pushing
p
p
capacity.
3 Use only with Sealey hydraulic pump and accessories. Wrong equipment may damage unit and invalidate your
warranty.
3 We recommend the use of BS approved safety impact goggles and heavy duty gloves when working with this
equipment. Both are available from your authorised Sealey dealer.
3 Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
3 If working on an ‘off centre’ load, pump with care. If you feel undue resistance, stop and re-adjust the set-up.
WARNING! Keep your hands, body and clothing away from the ram and load when in use.
p
p
Take any necessary precautions to protect your personal safety whilst using the ram.
Always be prepared for unexpected load movement, never place yourself or any part of your body in a
position that could result in injury, always use a crowbar or similar device to manoeuvre the load.
3 Ensure the hydraulic hose is not bent or kinked but laid out correctly. Avoid damage to the hose (e.g.
crushing/cutting).
3 Keep non-essential persons away from the operating area. Be aware of the locations of other persons
assisting you.
3 When releasing tension from the load be sure to undo the hydraulic valve VERY slowly.
7 DO NOT operate the ram if any parts are damaged or missing as this may cause failure and/or personal
injury.
WARNING! DO NOT use for any purpose other than for which it is designed.
p
p
7 DO NOT heat accessories as this may weaken them.
7 DO NOT modify accessories for use with this ram.
3 When not in use, place dust cap in end of hydraulic connector and store the ram, in a safe, dry,
childproof location.
2.
SPECIFICATIONS
Ram Model No.
Type.
Capacity.
Closed /Open Height.
RE97XS05
Push
5000kg
RE97XS10
Push
10000kg
RE97XS20
Push
20000kg
RE97XS30
Push
30000kg
SHORTY PUSH RAM
Models:
RE97XS05, RE97XS10
RE97XS05, RE97XS10
RE97XS20, RE97XS30
RE97XS20, RE97XS30
33/39mm
43/54mm
52/63mm
59/71mm
RE97XS05, RE97XS10, RE97XS20, RE97XS30 - 1 - 091104

Advertisement

loading

Summary of Contents for Sealey RE97XS05

  • Page 1 RE97XS20, RE97XS30 RE97XS20, RE97XS30 Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE...
  • Page 2 IMPORTANT: Only fully qualified personnel should attempt maintenance or repair to the hydraulic system. WARNING: DO NOT use brake fluid, or any fluid other than hydraulic jack fluid, as this may cause serious damage to the pump/ram and will invalidate the warranty! Use only Sealey hydraulic oil. General Before each use check for damage to ram, pump, hose and accessories.

This manual is also suitable for:

Re97xs10Re97xs20Re97xs30