Operation; Maintenance - DeWalt D21510 Original Instructions Manual

E N G L I S H
Fitting a Mixer Basket (fi g. B)
● Turn the mixer basket (8) into the tool holder (3).
● Once the basket has been fully turned into the
holder, tighten securely using an open-end
spanner (not included).
Fitting the Side Handle (fi g. A)
● Screw the side handle (4) into one of the
corresponding holes in the tool.
WARNING: Always use the side handle!
Fitting the Spade Handle (fi g. A)
● Screw the spade handle (5) into the corresponding
hole on the back of the tool. Note that the spade
handle can be mounted in two different positions.
WARNING: Use the spade handle
whenever possible.

OPERATION

Instructions for Use
WARNING: Always observe the safety
instructions and applicable regulations.
Proper Hand Position (fi g. A)
WARNING: To reduce the risk of
seriouspersonal injury, Always use
proper hand position as shown.
WARNING: To reduce the risk of serious
personal injury, ALWAYS hold securely
in anticipation of a sudden reaction.
Proper hand position requires one hand on the
side handle (4), with the other hand on the main
handle (6) or one hand on the spade handle (5)
with the other hand on the main handle (6).
Switching On and Off (fi g. A)
● To run the tool, press the variable speed switch
(1). The pressure exerted on the variable speed
switch determines the tool speed.
● If necessary, press the lock-on button (2) for
continuous operation and release the switch.
The lock-on button works only in full speed,
forward rotation.
22
● To stop the tool, release the switch.
● To stop the tool in continuous operation, press
the switch briefl y and release it. Always switch
off the tool when work is fi nished and before
unplugging.
● Always switch off the tool when work is fi nished
and before unplugging.
WARNING:
● Do not use this tool to mix or pump
easily combustible or explosive fl uids
(benzine, alcohol, etc.).
● Do not mix or stir infl ammable liquids
labelled accordingly.
Selecting the Appropriate Mixer Basket
(fi g. C1 - C4)
Refer to the table below for the appropriate mixer
basket to be used.
Round basket (fi g. C1)
For low-viscous media, e.g. inside and outside wallpaints,
lacquers, zinkdust paints, dispersion paints, mineral paints,
silicate paints, cement paints, rust-proof paints, chemicals,
concrete sludge
Spiral basket (fi g. C2)
For high-viscous materials, e.g. ready-mix mortar and
plaster, gypsum, plaster of Paris, chalk, concrete, adhesives
for ceramic and plastic tile, plastic fi llers, paste, granulates,
quartz-epoxy resins
Mortar basket (fi g. C3)
For high-viscous materials, e.g. ready-mix plaster, chalk,
lime, cement, mortar, joint fi llers, insulation plasters, quartz-
epoxy resins
Mixer baskets of plastic material (fi g. C4)
For low-viscous media, e.g. paints of all kinds, wallpaper
adhesives, chemicals, acids, dissolving liquids, liquid
fertilizer, pest sprays, animal feeds

MAINTENANCE

Your D WALT power tool has been designed to
E
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.