Electrical Safety; Package Contents; Assembly And Adjustment - DeWalt D21510 Original Instructions Manual

Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
DATE CODE POSITION (FIG. A)
The Date Code (7), which also includes the year of
manufacture, is printed into the housing.
Example:
2009 XX XX
Year of Manufacture

Package Contents

The package contains:
1 Mixer
1 Side handle
1 Spade handle
1 Tool holder 5/8" x M14, female thread
1 Instruction manual
1 Exploded drawing
● Check for damage to the tool, parts or accessories
which may have occurred during transport.
● Take the time to thoroughly read and understand
this manual prior to operation.
Description (fi g. A)
WARNING: Never modify the power tool
or any part of it. Damage or personal
injury could result.
1 Variable speed switch
2 Lock-on button
3 Tool holder
4 Side handle
5 Spade handle
6 Main handle
Intended Use
Your professional mixer D21510 has been designed
for heavy duty mixing of low-viscous media, including
paints, varnish; gypsiferous materials; adhesive and
high-viscous materials, including glue, mortar, etc.
DO NOT use this tool under wet conditions or in
presence of fl ammable liquids or gases.
This mixer is a professional power tool.
DO NOT let children come into contact with the tool.
Supervision is required when inexperienced operators
use this tool.

Electrical Safety

The electric motor has been designed for one
voltage only. Always check that the power supply
corresponds to the voltage on the rating plate.
Your D WALT tool is double insulated in
E
accordance with EN 60745; therefore no
earth wire is required.
WARNING: 115 V units have to be
operated via a failsafe isolating
transformer with an earth screen between
the primary and secondary winding.
If the supply cord is damaged, it must be replaced
by a specially prepared cord available through the
D WALT service organisation.
E
Mains Plug Replacement
(U.K. & Ireland Only)
If a new mains plug needs to be fi tted:
• Safely dispose of the old plug.
• Connect the brown lead to the live terminal in
the plug.
• Connect the blue lead to the neutral terminal.
Warning: No connection is to be made
to the earth terminal.
Follow the fi tting instructions supplied with good
quality plugs. Recommended fuse: 13 A
Using an Extension Cable
If an extension cable is required, use an approved
extension cable suitable for the power input of this
machine (see technical data). The minimum
conductor size is 1.5 mm 2 . When using a cable
reel, always unwind the cable completely.

ASSEMBLY AND ADJUSTMENT

WARNING: Prior to assembly and
adjustment always unplug the tool.
E N G L I S H
21