GE AF-600 FP Operating Instructions Manual page 51

O-10 Control Word Profile
Option:
[0] * Drive Profile
[1] PROFIdrive profile
[5] ODVA
[7] CANopen DSP 402
O-50 Coasting Select
Option:
[0] Digit Input
[1] Bus
[2] Logic AND
[3] * Logic OR
NB!
8
This parameter is active only when par. O-01 Control Site is set to [0] Digital and control word.
O-51 Quick Stop Select
Select control of the Quick Stop function via the terminals (digital input) and/or via the network.
Option:
[0] Digital Input
[1] Bus
[2] Logic AND
[3] * Logic OR
NB!
This parameter is active only when par. O-01 Control Site is set to [0] Digital and control word.
O-52 DC Brake Select
Option:
[0] Digit Input
[1] Bus
[2] Logic AND
[3] * Logic OR
NB!
This parameter is active only when par. O-01 Control Site is set to [0] Digital and control word.
50
Function:
Select the interpretation of the control and status words corresponding to the installed network. Only the
selections valid for the network installed in slot A will be visible in the keypad display.
Function:
Select control of the coasting function via the terminals (digital input) and/or via the network.
Activates Start command via a digital input.
Activates Start command via the serial communication port or network option module.
Activates Start command via the network/serial communication port, AND additionally via one of the
digital inputs.
Activates Start command via the network/serial communication port OR via one of the digital inputs.
Function:
Function:
Select control of the DC brake via the terminals (digital input) and/or via the network.
Activates Start command via a digital input.
Activates Start command via the serial communication port or network option module.
Activates Start command via the network/serial communication port, AND additionally via one of the
digital inputs.
Activates Start command via the network/serial communication port OR via one of the digital inputs.
AF-600 FP LonWorks