Yamaha HTR-5990 Owner's Manual page 46

PLAYBACK
y
• We recommend using AUTO in most cases.
• You can designate the default input mode to be selected when
the power of this unit is turned on (see page 84).
Notes
• If the digital output data of the player has been processed in any
way, you may not be able to perform DTS decoding even if you
make a digital connection between this unit and the player.
• If this unit detects a Dolby Digital or DTS signal, the decoder
automatically switches to the appropriate sound field program.
• The input jacks not assigned are not available as input modes.
■ Displaying information about the input
source
You can display the type, format and sampling frequency
of the current input signal.
1
Set AMP/SOURCE/TV to AMP and then press
SET MENU on the remote control.
The top SET MENU screen appears in the OSD.
AMP
SOURCE
TV
2
Press n repeatedly and then press ENTER to
select INFORMATION.
PRESET/CH
ENTER
A-E/CAT.
The following information appears in the OSD.
Note
Press l / h to toggle between the audio and video
information displays.
42
SET MENU
MENU
SRCH MODE
SET MENU
. ;AUTO SETUP
;MANUAL SETUP
. ;INFORMATION
[ ]/[ ]:Up/Down
[ENTER]:Enter
PRESET/CH
ENTER
A-E/CAT.
Audio information
FORMAT
Signal format display. When the unit cannot detect a
digital signal, it automatically switches to analog
input.
SAMPLING
Sampling frequency. When the unit is unable to
detect the sampling frequency "?" appears.
CHANNEL
Number of source channels in the input signal. For
example, a multi-channel soundtrack with 3 front
channels, 2 surround channels and LFE, is displayed
as "3/2/0.1".
BITRATE
Bit rate. When the unit is unable to detect the bit rate
"– – –" appears.
DIALOGUE
Dialogue normalization information for Dolby
Digital and DTS signals.
FLAG
Flag data encoded in Dolby Digital, DTS and PCM
signals that cue this unit to automatically switch
decoders.
Video information
HDMI Signal Type
Type of the HDMI signals input or output at the
HDMI IN/OUT jacks of this unit.
HDMI Resolution
Resolution of the HDMI signals input or output at the
HDMI IN/OUT jacks of this unit.
Analog Resolution
Resolution of the analog signals input or output at the
video component jacks of this unit.
3
Press SET MENU on the remote control again
to exit.
SET MENU
MENU
SRCH MODE