Using The Sleep Timer - Yamaha HTR-5990 Owner's Manual

PLAYBACK

■ Using the sleep timer

Use this feature to automatically set this unit in the
standby mode after a certain amount of time. The sleep
timer is useful when you are going to sleep while this unit
is playing or recording a source. The sleep timer also
automatically turns off any external components
connected to the AC OUTLETS.
1
Select an input source and start playback on
the source component.
2
Press SLEEP on the remote control
repeatedly to set the amount of time.
SLEEP
Each time you press SLEEP, the front panel display
changes as shown below.
SLEEP 120min
SLEEP OFF SLEEP 30min
The SLEEP indicator flashes while switching the
amount of time for the sleep timer.
V-AUX DVR/VCR 2 VCR 1 CBL/SAT
S L E E P
SP
A S L E E P 0 0 1 2 0 m i n
The SLEEP indicator lights up in the front panel
display, and the display returns to the selected sound
field program.
V-AUX DVR/VCR 2 VCR 1 CBL/SAT
M U S I C
HiFi DSP
SP
H a l l i n V i e n n a
A
3
Press SLEEP repeatedly so that SLEEP OFF
appears in the front panel display.
V-AUX DVR/VCR 2 VCR 1 CBL/SAT
S L E E P O F F
SP
A
After a few seconds, SLEEP OFF disappears, and the
SLEEP indicator turns off.
y
The sleep timer setting can also be canceled by pressing
STANDBY on the remote control (or MAIN ZONE ON/OFF on
the front panel) to set this unit, Zone 2 and Zone 3 to the standby
mode.
40
SLEEP 90min
SLEEP 60min
DTV DVD MD/TAPE CD-R CD PHONO TUNER
1 2 0 m i n
dB
VOLUME
L R
SLEEP
DTV DVD MD/TAPE CD-R CD PHONO TUNER
dB
VOLUME
L R
SLEEP
SLEEP
DTV DVD MD/TAPE CD-R CD PHONO TUNER
dB
VOLUME
L R
SLEEP
■ Downmixing to 2 channels
You can enjoy 2-channel stereo playback from multi-
channel sources.
Rotate the PROGRAM selector (or set
AMP/SOURCE/TV to AMP and then press
STEREO on the remote control) to select 2ch
Stereo.
2ch Stereo appears in the front panel display.
AMP
SOURCE
TV
XM
Note
You can use a subwoofer with this program when SWFR or
BOTH is selected in LFE/BASS OUT (see page 76).
■ Listening to unprocessed input signals
XM
When the unit is in the STRAIGHT mode, 2-channel
stereo sources are output only from the front L/R speakers.
Multi-channel sources are decoded straightly into the
appropriate channels without any additional effect
processing.
1
Press STRAIGHT (EFFECT) on the front
panel or on the remote control to select
STRAIGHT.
STRAIGHT appears in the front panel display.
XM
STRAIGHT
EFFECT
Front panel
PROGRAM
Front panel
or
STEREO
1
Remote control
2 c h S t e r e o
STRAIGHT
or
EFFECT
Remote control